Search results

Update - Shop called and said a z case fuse had blown causing no power to interior of truck. They are replacing it so they can further diagnose.

The aux battery was replaced in April. No sparks when installing it or the new main battery today. The new battery is not dead. The truck was running but just wouldn’t move (if you press the accelerator, it just revved). I got it out of the street and unhooked the main battery so it wouldn’t...

I pulled my 2020 Rubi Gladiator in to get gas today and after refueling it would not start. No cranking, clicking, nothing. I pushed it to a parking spot and tried to use my jumper pack. Nothing. Tried jumping from another car. Nothing. Bought a new battery, installed and it started but the dash...

Thank you!

I’m just doing a two wire. The top image is from all the extensions I have found on the web. They are called DTP and the bottom is what I have (the harness that came with the lights). I don’t see any part numbers.

are these compatible with the same male end?

On the center ones, there is a small square opening just to the left of where the nut should lay. I was able to get a bent piece of wire in there and fish the nut into place so I could gently insert the bolt. Once it started, I threaded it while pulling down on the bolt.

I had to take it to the dealer. They said the nut miraculously worked it's way back into place and they were able to get the bolt to bite. I find that hard to believe but the rails are on securely so...

No, the rear one is a cylinder with a hole in the bottom. There appears to be no other access to where the nut is.

That’s how I got the middle one to re engage but the rear one I can’t locate

Thanks Renegade. Five O, yes, I have them in the right positions. The back nut is gone (bolt dose t engage into anything. Middle bolt is back in but won’t come back out because nut spins. Front bolt is fine.

I have searched the threads and can’t find anyone that has encountered the issue I ran into. I bought Ace sliders. Removed the three passenger side body bolts and installed the slider. Moved to the driver side, removed the body bolts successfully, went to mount the slider and the body bolt in...

20” Fuel Zephyr wrapped in 35” Toyo Open Country’s