metalcloak

Hey guys, I’m chasing a weird clunk on my 2024 Jeep Gladiator Rubicon (3.6) and hoping for some direction. Setup: 3.5” Metalcloak Overlander lift (installed new) 37” tires ~16,000 miles Issue: I’m getting two distinct clunk noises when: hard acceleration (from stop) quick braking /...

Had a Clayton 1.5” Overland+ done this past week. I went with the MetalCloak rear sway bar brackets as an upgrade over the weak stock mounting point on the chassis. Long/short, the RockBlokz rear mud flap mount does not work together with the sway bar brackets without some modification. I...

I'm pretty sure most people on this forum are not novices to off-roading, which is what the Skillz Day by MetalCloak is about. With that said, is anyone going or has anyone been to Prairie City SVRA? I've had my Mojave for over a year now and only have 3400 miles on it. I'm sad to say I haven't...

We just launched some new clamps for our 2" tubing and we have some new accessories coming out soon as well for maxtrax, rotopax, etc. In addition to that, we just rolled out a shorter hoop for the BakPak bed rack system for those that don't want to run the JT Overcab system. See images below...

Metalcloak ‘s JL/JT Front Bumper base and winch plate along with the 46” crawler caps. Installed this on my brother’s gladiator. He’s just saving up now for lights and winch, figured I’d share some pictures with dimensions if any was curious since I don’t see these around much.

Time to do it again! As a way of saying Thank You we are continuing our Jeep Gladiator Forum Monthly Giveaway. Periodically we will giveaway a cool product or two for the JT Gladiator. It could be a full suspension system, small parts, a set of shocks, skid plates, Overland fenders...

Time to do it again! As a way of saying Thank You we are continuing our Jeep Gladiator Forum Monthly Giveaway... each month we will giveaway one product for the JT Gladiator. It could be a full suspension system, small parts, a set of shocks, skid plates, Overland fenders, whatever... each...

At the beginning of this year I bought a near-stock, used Mojave with 5000 miles on it at the time. It was built in July 2021 and had everything I wanted from the factory, including some things the previous owner put on it that I would have done as well. As Purchased: * Mopar Steel Bumpers *...

New to the forum and have tried to find reviews, feedback on the Rock Jock Pro suspension system for the Gladiator. Does any one have experience with this kit? Pros/Cons? I would appreciate any feedback. Thanks.

Hey guys, it is finally time to get the suspension lift. I am trying to figure out the total actual lift height for the Clayton 2.5 Overland +, the Rock Krawler 3.0 Adventure Pro, and the Metal Cloak 3.5 game changer suspension. I've heard that the Clayton runs more like a 3 inch and the game...

I purchased a Metalcloak and a Synergy adjustable track bar and decided to go with Synergy. I did put anti-seize on it and test fit it but took it back off, zero miles. Instead of sending it back I thought I would pass it along for a discount. I would like $150 for it.

Go Rhino RB20 running boards with drop steps; textured black AVS Aeroskin II @Metalcloak frame-built front bumper #2401; fixed center with skid plate Gear America Mega Shackles with isolators; black Fuel Vapor wheels 20x9; matte black General Grabber A/TX E LT35X12.5R-20 Overtread Doran hood w/...

I have a set of Metalcloak 3.5" lift springs for the gladiator. They are still in the box they were shipped in from Metalcloak. I ordered the entire 3.5" gamechanger lift, but decided I do not want to move up further in tire size than I already have so I am planning to use the metalcloak...

So I'm going to attempt to keep this up to date. It's my first time doing a build post, also doing it mostly on my phone so hopefully the format isn't horrible to look at. I'm going to break this into 3 post. Intro, Parts (I'll try and link all) and Trips/pictures Ordered: 11/16/2019 Received...

Just starting a thread for all things related to the Metalcloak suspension systems. I PM'ed them on facebook today. They told me the current ETA for their 3.5" lift in 4-6wks out. After that once comes to market they will work on a 2.5" lift, followed by a higher lift. So good news. It's coming!!