Sponsored

regear

  1. No aftermarket LSDs for non-Rubicon Gladiators?

    While looking to regear my Sport S (open 3.73s) to a 28-spline gear set, I wanted to add some combo of limited slip diffs or a locker and LSD to the truck. LSDs preferably, as I no longer wheel much and the fully-locking options are about double the price. I’ve since found that the 4.56 or...
  2. Where to find a Dana 44 Housing (and parts) for training

    Hello, I'm trying to purchase a Dana 44 Housing in any state, just the major housing. No pipes are needed to practice pre-loading and training to work in my differential. I don't want to go straight to my Dana open and then deal with unknowns, so I can work with the pinion depth tool. I wanted...
  3. HOT DEAL - Genuine Dana Spicer 4.88 Gears on SALE!

    Did you install 35s or 37s and now ready to regear your Jeep and get some power back??? We've got genuine Dana Spicer 4.88 gearsets and install kits in a package deal at $459.00 off MSRP! Kit includes: Dana Spicer 4.88 gears front M210 Dana 44 Dana Spicer Master Install kit front M210 Dana...
  4. Re-gear 2024 Gladiator Willys

    Hello all, new to this forum and new Gladiator owner. Have previously owned two JL's. I'm interested in putting on the Mopar 2" lift to fit 35 inch tires, and in conjunction I'm interested in a re-gear. Mine came from the factory with a 3.73 gear ratio which I know some say is sufficient but I'm...
  5. Spicer Regear, NO BREAK IN or 500 Mile Oil Change Needed

    Hey everyone. I'll be having my JTRD regeared next week using Spicer gears. I reached out to Spicer Gears about the correct break in procedure following a regear. They just got back to me with the following: Hello Karol, just heard back: There is no break in period or oil change necessary...
  6. 35-11.50-r17 Tires and 4.10 Gears

    Hello, I’ve got a 2022 v6 Gladiator Rubicon with stock 4.10 gears. I will be going from my stock 285-70-r17 (Wildpeaks 63lbs) tire size up to 35-11.50-r17 (Ridge Grapplers 66lbs) tire. Does anyone have any experience with this setup? I do a fair bit of highway driving. My hope is that I can...
  7. MOPAR 4.88 re-gear at dealership?

    Have started towing a bit with my JT and decided to finally take the regear plunge. Long story short, I’d like to have this done through the dealership based on the JPP warranty for dealership-installed accessories as well as the overall vehicle warranty. I have about a year left of the initial...
  8. Stock Mojave on 35s? Or regear necessary?

    Hello, I am a relatively new Gladiator owner. Wound up getting a mojave because it was easily the most appealing unit on the lot and the shocks and upgrades to frame and suspension greatly appealed to me. Additionally I don't do any rock climbing anywhere near the scale of what I've seen in the...
  9. To regear or not to regear?

    Other MANUAL Gladiators out there… RE-Gear?? Thoughts? What did you do and what size tires do you run? Also cost I’m seeing $2400-$2800 I run my rig through high speed desert runs it’s a Mojave, but also rock crawl, tow, and haul a full bed and motorcycles. On 35s I basically never use 5th...
  10. Gladiator 5:13 Gearing quotes

    I know this topic has been addressed and best to death, but I’m hoping for some feedback. I recently did something I thought I’d never do; I traded my built 5th gen 4Runner for a 2020 Mojave. The Mojave is in incredible condition, I scrutinized and looked over it in detail prior to purchasing...
  11. Northwest Indiana regear shop

    I live in the northwest indiana area and was wondering if anyone has info on reputable regear shops in the area, including northern indiana and the Chicago land area. Google searches don’t bring up much info.
  12. Mojave regear

    Well folks, I think it’s time for me to regear from my 4.10 to either 4.88 or 5.13. The question I have is which gear ratio would y’all recommend & what brand? Also, another question I have is how much did y’all pay for it to be done? Or did y’all do it yourselves? A little about my truck...
  13. 35s & 4.56 gears experience

    Several people asked me to post my experience with 4.56 gears, so here it is. I've got a 2021 Gladiator Overland, 3.6L V6 with manual transmission, which came with the 3.73 gears. A couple of months ago I added a Mopar 2" lift and 35 inch mud terrain tires. Last week, I had the gears swapped...
  14. 5.13s go in tomorrow!

    Scheduled to get 5.13s installed tomorrow and can't wait! 4.10s are "fine" with the 37s but the truck needs something steeper especially when towing. I went with the Yukon master kit and the Y.E.S. warranty from Randy's Ring and Pinion. They are great folks to deal with and very knowledgeable...
  15. New York Pulsar programmer by Diablo, NIB

    New in box, comes with bracket, looking to get $475 net and I’ll ship. Retail $600
  16. If only I knew then what I think I know now

    So my dealer tried to keep me from making a mistake. Although I didint understand it at the time. He tried selling me a loaded up sport s that had max tow. And I sold him on why I only needed a hitch. Now wanting to put 37” on but only having 3.73 gears. What kind of damage am I looking at...
  17. Need to Regear Your JT and live in the SoCal area?

    Need to Regear Your JT and live in the SoCal area? Get a new set of gears installed in BOTH axles for $1699.99, labor included! Details: $1699.99 installed (does not include tax) Price covers parts and labor Revolution Gear and Axle parts used Available for Dana 30/44 axles from 2018+ Jeep...




Top