Are these cameras compatible with factory 8" display screen?

[Pirate Mclovin]

https://trailseven.com/products/sti...p-jt-gladiators-1?_pos=2&_sid=014130919&_ss=r

Found these I love the idea, but are they compatible with the 8" display?

Sponsored

 

[ErylFlynn]

Probably not like you want. They likely can connect to the cargo cam inputs which are 480i or so resolution. I do not think any other factory location will work, and you might need an adapter as well.

 

[KevinM60]

https://trailseven.com/products/sti...p-jt-gladiators-1?_pos=2&_sid=014130919&_ss=r

Found these I love the idea, but are they compatible with the 8" display?

Here's the same one for $50 cheaper.

https://www.amazon.com/STINGER-Wran...mzn1.fos.d977788f-1483-4f76-90a3-786e4cdc8f10

AND, there's an install video that says something about connecting to the 8.4" screen and If I remember right you may have to have the connection turned on by the dealer or something like a JSCAN.

 

[Pirate Mclovin]

Here's the same one for $50 cheaper.

https://www.amazon.com/STINGER-Wran...mzn1.fos.d977788f-1483-4f76-90a3-786e4cdc8f10

AND, there's an install video that says something about connecting to the 8.4" screen and If I remember right you may have to have the connection turned on by the dealer or something like a JSCAN.

Thanks, yeah I'm planning on buying a tazer one of these days.

 

[KevinM60]

Thanks, yeah I'm planning on buying a tazer one of these days.

You're welcome.
I was checking those out a while back to use for blindspot cameras but they face forward and didn't look like they would cover the blindspot very well.
I could be wrong but I didn't want to spend the money and do the install and find that I was right.

 

[RCott77]

Just my 2C. I have looked at these cameras also for the blind spot advantage. There are some other parts on Amazon like this that will enable multiple cameras and with blinker input will switch to the correct camera. It would be great if Tazer would enable you the ability to turn on Cargo Cam for this feature instead of Rear cam like they do now. Never made sense to me why I would want to see someone at the ass end of my vehicle if they are already in my blind spot.

 

[Woodturner]

https://trailseven.com/products/sti...p-jt-gladiators-1?_pos=2&_sid=014130919&_ss=r

Found these I love the idea, but are they compatible with the 8" display?

I purchased the Stingers and as the company stated, the necessary PAC VS-41 connector. But I haven’t found any videos or anyone who knows how to connect these items to my factory 8.4 monitor.
If anyone might have info on this, please share it. The YouTube videos stop short of connecting to the monitor and only show full process to the High10. Thanks!

 

[Pirate Mclovin]

I purchased the Stingers and as the company stated, the necessary PAC VS-41 connector. But I haven’t found any videos or anyone who knows how to connect these items to my factory 8.4 monitor.
If anyone might have info on this, please share it. The YouTube videos stop short of connecting to the monitor and only show full process to the High10. Thanks!

I did some more research the stinger camera don't connect to stock screens. There is an alternative I found. Little more pricy though.

 

[Woodturner]

Thank you! Well someone will get a deal on the resale of the side and front cameras!?
Can’t justify the High10. Thank you for your post!

 

[XraytecH]

https://trailseven.com/products/sti...p-jt-gladiators-1?_pos=2&_sid=014130919&_ss=r

Found these I love the idea, but are they compatible with the 8" display?

You need to figure out how to switch between cameras with your turn signals.

 

[XraytecH]

You need this...

Sponsored