Brights - won't stay on

[Stphnmcknz]

Have to hold brights on, otherwise it reverts to dims. It's dark at 5 in NS any suggestions.

Sponsored

 

[Deleted User 19811315]

https://www.jeepgladiatorforum.com/forum/threads/an-idiots-guide-to-auto-high-beams.63531/

check this out sounds about right for your experience

 

[NHyde]

Are your lights, off?

 

[Mr._Bill]

Have to hold brights on, otherwise it reverts to dims. It's dark at 5 in NS any suggestions.

Push forward to toggle on and off. Pull back for temporary on. Dial has to be in On or Auto position. If it isn't working correctly, will need a dealer visit to repair.

 

[Outback_Joe]

Push forward to toggle on and off. Pull back for temporary on. Dial has to be in On or Auto position. If it isn't working correctly, will need a dealer visit to repair.

And why jeep needs to be different than some/most of the other manufactures?

It would be nice if Tazer could fix this?

 

[kauffmj1]

https://www.jeepgladiatorforum.com/forum/threads/an-idiots-guide-to-auto-high-beams.63531/

check this out sounds about right for your experience

This is probably your issue. My Ram had the auto high beams and it drove me nuts until I figured out why it was doing it. There was a setting in the Uconnect that let me shut that feature off. Not sure if Jeep allows you to shut it off in the vehicle settings too.

 

[Stphnmcknz]

Thank you RichGlad . It starts to dark here at four o'clock so yes I have my lights on auto. So you gave the best answer to try but I had no luck. Hopefully a burned out fuse. Thanks again it was worth a try.

Sponsored