erikthetex
Member
- Thread starter
- #1
I recently purchased the Fab Fours Sport Rack https://fabfours.com/product/jeep-jt-sport-rack/ and took off the soft tonneau cover that came from the dealer. The rack is fantastic...
The kicker is I got spoiled with the soft tonneau cover having that extra covered storage space.
I'm now mulling over what to do... install some Decked drawers (feels restrictive and would limit overall capacity)? Or maybe try to find a tonneau that works on the inside rails?
The bar has an edge that runs the length of the bed:
But the tricky part looks like it'll be up front because of this slight overlap and the width of the poles...
I reached out to BAK to see if maybe the rolling Revolver X4 would work and they stated it won't because of the bracket system (I see it now that I found some pics of the install on amazon (didn't think to look there!)).
The Sport Rack works with the mopar trail rail anchor system - it hugs the edges nicely and has a lip that goes under and down the side, using the same mounting spots. I'm wondering if I can get away with a tonneau cover that sits within that space, so long as they have some "tolerances" built in with the fit. The posts up front don't exactly protrude aside from that 2" span of hang over for the vertical bar joint.
Would any of you have recommendations about what may work here? Have any of you come across "flush with the top of the bed and inside the rails" options that don't chew up too much space?
The kicker is I got spoiled with the soft tonneau cover having that extra covered storage space.
I'm now mulling over what to do... install some Decked drawers (feels restrictive and would limit overall capacity)? Or maybe try to find a tonneau that works on the inside rails?
The bar has an edge that runs the length of the bed:
But the tricky part looks like it'll be up front because of this slight overlap and the width of the poles...
I reached out to BAK to see if maybe the rolling Revolver X4 would work and they stated it won't because of the bracket system (I see it now that I found some pics of the install on amazon (didn't think to look there!)).
The Sport Rack works with the mopar trail rail anchor system - it hugs the edges nicely and has a lip that goes under and down the side, using the same mounting spots. I'm wondering if I can get away with a tonneau cover that sits within that space, so long as they have some "tolerances" built in with the fit. The posts up front don't exactly protrude aside from that 2" span of hang over for the vertical bar joint.
Would any of you have recommendations about what may work here? Have any of you come across "flush with the top of the bed and inside the rails" options that don't chew up too much space?
Sponsored