Gremlin?

[EricStanley]

I’m on a somewhat long road trip with another driver (sadly all on-road, no trails this time). After a couple days, they radioed to tell me that my backup lights were on as we were both pulling away from the AirBnB. I tried several ideas to get them to turn off and the only thing that worked was to shut the truck off and lock it with the remote. All seemed well until a little later the same day (after a stop for dinner). I was behind him this time and he radioed to tell me that he happened to look in his rear view and watched the passenger side headlight and passenger side fog light turn on (and the headlight was on it’s high beam setting). Again the only solution was the same as the reverse lights: shut it off and lock it with the remote. One thing to note is that the blinkers and 4-ways did not work when either of these things were happening. When neither of these things were happening, everything seemed to function fine.

Notes about the truck:
-2020 JTR
-75kish miles
-TazerJL
-QuakeLED Quad Lock controller for a bunch of QuakeLED lights (though none of these were included in the odd behavior).
-Factory LED package
-replaced both batteries several months ago.

Anyone seen this before or have ideas on what’s causing it?

Sponsored

 

[PuddleJumper]

Go into the Tazer menu and reset the module. Sounds like its auto starting a light dance combo on start up and then freezing when it realizes its not supposed too.

 

[Empty Pockets]

Gee, when you said “Gremlin”, I thought you were talking about one of these-

 

[EricStanley]

Go into the Tazer menu and reset the module. Sounds like its auto starting a light dance combo on start up and then freezing when it realizes its not supposed too.

Good call. Reboot done and will keep an eye on it. Thank you!

 

[HorsesRear]

I have been holding off purchasing a Tazer mainly for reasons above. My son has one on his Gladiator, he made quite a few changes with it and the next morning the battery was dead. I would really hate to be on a trip and have something go wrong as a result of installing the Tazer. I have been told that if you follow their instructions to the letter than you should not have any problems. I know there are other options available and I am still researching.

Sponsored