Interior accessories switch harness location / constant 12V mod

[samw5]

Trying to find the location of the interior harness for the accessories switch which my 2021 Rubi is equipped with. I understand under the hood is next to the battery but I'm looking at getting a constant 12V and figured that it would be easier to grab is directly from that harness rather than having to pull another wire thru the firewall).

Also seen these constant 12V mode listed for the JL/JT https://www.cooltechllc.com/2018-jeep-wrangler-jl/111-jl-powerport-kit.html.
I already have the mini jumper and inline fuse at hand so was going to try that myself...
I'm assuming that I need need to run the cable from the distribution box directly to fuse F52 (cig lighter)?

Sponsored

 

[Mr._Bill]

If you have the factory installed AUX switches, the 12v hot wires are in the bundle under the glove box. They are wrapped to the harness that runs under there, so you will have to look closely to find them.

 

[samw5]

Ya found it... Also found a little white/green wire in the side kick panel similarly taped... But for now I have my constant 12v so Im good.

Any idea regarding getting power to the cig lighter outlet? Connect the mini fuse jumper to the delivery block and to f52?

Sponsored