LuisRecio
Well-Known Member
- First Name
- Luis
- Joined
- Oct 16, 2023
- Threads
- 58
- Messages
- 178
- Reaction score
- 405
- Location
- Houston, Texas
- Website
- www.undergroundgraphics.com
- Vehicle(s)
- 2021 Jeep Gladiator Rubicon
- Thread starter
- #1
Our second offering for the Gladiator. These are the single piece grills with the wider slats.
The idea of this graphic set is fun and simple. A simple way to add a splash of accent color to the grill. We chose to do this as an accent for the driver side, so it is not currently available for all 7 slots, (however we can, call if you want the 7), nor is it available for the headlight rings.
Additionally, we designed this two ways:
Will be the easiest to install, basically a 1/4 inch pinstripe (it's thicker at the bottom), that lays just at the edge of the grill opening. This leaves a bit of uncovered area at the edge nearest the mesh grill.
Will be add more vinyl material on the inside edge, giving you near full coverage. This is also more difficult to install, as less margin for placement tolerance. If you're wanting 100% coverage, we recommend the plastic inserts sold on eBay, although not sure if they have made the Gladiator fitments yet.
Website product link
As with all our vehicle graphics, we're using wrap vinyl, so DRY install only. Computer cut for a precise fit and very easy install. Be sure and watch our YouTube tutorial installation.
Comes as a set of 4, you'll get 2 sets (1 extra in case you need a second), and can choose either single or dual inlays.
For more information or questions, please don't hesitate to contact us
Phone: 713.783.4739
Email: [email protected]
The idea of this graphic set is fun and simple. A simple way to add a splash of accent color to the grill. We chose to do this as an accent for the driver side, so it is not currently available for all 7 slots, (however we can, call if you want the 7), nor is it available for the headlight rings.
Additionally, we designed this two ways:
STANDARD
Will be the easiest to install, basically a 1/4 inch pinstripe (it's thicker at the bottom), that lays just at the edge of the grill opening. This leaves a bit of uncovered area at the edge nearest the mesh grill.
FULL
Will be add more vinyl material on the inside edge, giving you near full coverage. This is also more difficult to install, as less margin for placement tolerance. If you're wanting 100% coverage, we recommend the plastic inserts sold on eBay, although not sure if they have made the Gladiator fitments yet.
Website product link
As with all our vehicle graphics, we're using wrap vinyl, so DRY install only. Computer cut for a precise fit and very easy install. Be sure and watch our YouTube tutorial installation.
Comes as a set of 4, you'll get 2 sets (1 extra in case you need a second), and can choose either single or dual inlays.
For more information or questions, please don't hesitate to contact us
Phone: 713.783.4739
Email: [email protected]
Sponsored
Last edited:
