jeepncrowd
Well-Known Member
- Thread starter
- #1
Hey y'all.
Here is my current plan with guestimated prices (they will fluctuate with time/sales). After actually putting my plan on paper I've released how pricey it'll be. Fortunately I have years to build it. I plan on building in stages (the order within the stages may vary), but hope to have a new stage completed every couple of years. Of course this is subject to change. But I am anxious to get my new JT and start on the build and adventures.
Build plan
**Stage 1 “Overland”
Winch SmittyBuilt X2O: (Installed)
Builtright bed rack system: (Installed)
JCR Dagger Front Bumper: (Installed)
Hot Head Head liners: (Installed)
CB radio Cobra 75 wx/st: (Installed)
GMRS Radio BTECH Mobile 50x1: (Installed)
Cell phone booster system $300
Rock slide Engineering sliders: (Installed)
Rebel Off Road Half Rack: (installed)
Access Light Rider Tonneau cover: (installed)
Dobinsons awning: (installed)
Tuff Stuff Shower tent: (installed)
Overland Vehicle Systems Nomedic 3 tent (with Annex): (installed)
Bartact seat covers : (installed)
Rugged ridge snorkel : (Installed)
JCR Short Rack: (installed)
**Stage 2 “Performance”
RCV front axle shafts : (Installed)
Metalcloak Diff Covers: (Installed)
Tazer JL mini: (Installed)
Metalcloak Undercloak skid system: (Installed)
Steersmarts Steering upgrade (Tie Rod/ Griffen drag link/ Sway bar end links): (Installed)
Metalcloak 3.5” Gamechanger Rocksport: (Installed)
Front Driveshaft: (Installed)
37” Cooper STT Pros: (Installed)
Block rock D Window Allow wheels: (Installed)
Yukon 5.13 gears: (Installed)
Rock Jock Anti-Rock rear sway bar: (Installed)
Spicer chromoly rear axles: (pending)
Dynatrac HD ball joints: (pending)
**Stage 3 “Freedom”
Sunrider soft top: (Installed)
Core Doors front: $1,500
Core doors Rear: $1,500
Rear Winch bumper (w/ winch): $2,000
**Stage 4 “High Performance”
Amercian Adventure Labs High line fenders/Inner fenders: $450 (Installed)
Metal Cloak 6 pack shocks: (Installed)
Truss/sleeve axles: $2,000
Here is my current plan with guestimated prices (they will fluctuate with time/sales). After actually putting my plan on paper I've released how pricey it'll be. Fortunately I have years to build it. I plan on building in stages (the order within the stages may vary), but hope to have a new stage completed every couple of years. Of course this is subject to change. But I am anxious to get my new JT and start on the build and adventures.
Build plan
**Stage 1 “Overland”
Winch SmittyBuilt X2O: (Installed)
Builtright bed rack system: (Installed)
JCR Dagger Front Bumper: (Installed)
Hot Head Head liners: (Installed)
CB radio Cobra 75 wx/st: (Installed)
GMRS Radio BTECH Mobile 50x1: (Installed)
Cell phone booster system $300
Rock slide Engineering sliders: (Installed)
Rebel Off Road Half Rack: (installed)
Access Light Rider Tonneau cover: (installed)
Dobinsons awning: (installed)
Tuff Stuff Shower tent: (installed)
Overland Vehicle Systems Nomedic 3 tent (with Annex): (installed)
Bartact seat covers : (installed)
Rugged ridge snorkel : (Installed)
JCR Short Rack: (installed)
**Stage 2 “Performance”
RCV front axle shafts : (Installed)
Metalcloak Diff Covers: (Installed)
Tazer JL mini: (Installed)
Metalcloak Undercloak skid system: (Installed)
Steersmarts Steering upgrade (Tie Rod/ Griffen drag link/ Sway bar end links): (Installed)
Metalcloak 3.5” Gamechanger Rocksport: (Installed)
Front Driveshaft: (Installed)
37” Cooper STT Pros: (Installed)
Block rock D Window Allow wheels: (Installed)
Yukon 5.13 gears: (Installed)
Rock Jock Anti-Rock rear sway bar: (Installed)
Spicer chromoly rear axles: (pending)
Dynatrac HD ball joints: (pending)
**Stage 3 “Freedom”
Sunrider soft top: (Installed)
Core Doors front: $1,500
Core doors Rear: $1,500
Rear Winch bumper (w/ winch): $2,000
**Stage 4 “High Performance”
Amercian Adventure Labs High line fenders/Inner fenders: $450 (Installed)
Metal Cloak 6 pack shocks: (Installed)
Truss/sleeve axles: $2,000
Sponsored
Last edited: