Simple Man
Well-Known Member
- First Name
- David
- Joined
- Mar 23, 2021
- Threads
- 18
- Messages
- 93
- Reaction score
- 84
- Location
- North Carolina
- Vehicle(s)
- 2021 Gladiator Rubicon / 3.5 Metal Cloak Lift
- Occupation
- T&D Operations Supervisor
- Thread starter
- #1
For the past 2 weeks I have had a annoying rattle ........... like the door wasn't closed good.
Replaced the inserts at at the door hinges and it did nothing. Yesterday I had time to look at this deeper and found that the vertical insert that separates the main window from the smaller window had worked itself down on the bolt at the bottom.
1- Basically all you need to do is take the interior door panel off (no need to remove door handle) just let the panel hang.
2- Locate the vertical divider that separates the two pieces of glass
3- At the bottom of the vertical divider locate the single bolt and loosen it
4- Slide the vertical as far up as you can (I used a little upward force)
5- Tighten bolt and you are done
Hope this helps someone
David
Replaced the inserts at at the door hinges and it did nothing. Yesterday I had time to look at this deeper and found that the vertical insert that separates the main window from the smaller window had worked itself down on the bolt at the bottom.
1- Basically all you need to do is take the interior door panel off (no need to remove door handle) just let the panel hang.
2- Locate the vertical divider that separates the two pieces of glass
3- At the bottom of the vertical divider locate the single bolt and loosen it
4- Slide the vertical as far up as you can (I used a little upward force)
5- Tighten bolt and you are done
Hope this helps someone
David
Sponsored