Rebel Off-road Summit Series Rear Bumper

[Smoke Machine]

Love how clean Rebel’s Summit Series Bumper looks on the JTRD. The KC G34’s look like a football stadium. I have they wired to Aux-3 (the first 15A wire). Love the foot/step cut outs. Very useful.

Sponsored

 

[TexasTJ]

How well are your parking sensors? Mine haven't worked right since I installed the bumper, keeps saying I need to clean the sensors. Also, any issues with your bed sliders touching your flares, or the driver side one touching the muffler?

 

[Smoke Machine]

How well are your parking sensors? Mine haven't worked right since I installed the bumper, keeps saying I need to clean the sensors. Also, any issues with your bed sliders touching your flares, or the driver side one touching the muffler?

1). Yes. The rear sensors do not work perfectly since they sometimes beep in reverse when nothing is around. . You can aim/adjust them by reaching up into the bumper. I’ll give it a try and report back.

2). No, it’s not rubbing. I have adequate clearance for the rear fenders.

3). No, it’s close to the exhaust but I have enough clearance.

 

[TexasTJ]

On of the studs for the sensors wasn’t welded properly and I didn’t notice until after powder coat, Rebel basically told me figure it out.
I probably need to re-adjust the sliders then. Thanks.

 

[Smoke Machine]

How well are your parking sensors? Mine haven't worked right since I installed the bumper, keeps saying I need to clean the sensors. Also, any issues with your bed sliders touching your flares, or the driver side one touching the muffler?

Just put these D-rings on. Amazon for $50/pair. Feel beefy - we’ll see next time I gotta get yanked. Bonus: they match my front ARB hooks ?o

 

[HVYMETL]

Just put these D-rings on. Amazon for $50/pair. Feel beefy - we’ll see next time I gotta get yanked. Bonus: they match my front ARB hooks ?o

Looking to get this bumper on my 2021 JTRD... I'm not seeing any license plate lights, are they not incorporated into the bumper? Anything you want to add now that you have had it a while?

 

[TexasTJ]

Looking to get this bumper on my 2021 JTRD... I'm not seeing any license plate lights, are they not incorporated into the bumper? Anything you want to add now that you have had it a while?

They include license plate light bolts that you have to tap into you’re factory wiring. I didn’t want to do that, so I cut my bumper to fit the OE light housings.

 

[DavoSmith]

Does anyone have any real world hard use with the Rebel Off Road Summit Series Rear Bumper with Bedside Slider Steps? Specifically has anyone come down hard with the full weight of their loaded Gladiator onto one of the sliders?

Can someone post some pictures of the bracing of the slider/step?

Sponsored