Joe_G
Well-Known Member
- Thread starter
- #1
Installed an Ebay steel bumper and I'm quite pleased with it. Prices on these are way down, $300 shipped. I need plugs for the sensor holesin the bumper ends that are at an angle. I have 1 .25 plugs from Amazon that work fine in the holes that are flat, but two of the holes are bisected by an angle and the plugs won't stay in because of it.
Hopefully someone has solved the problem and can share the solution. Thanks in advance.
Hopefully someone has solved the problem and can share the solution. Thanks in advance.
Sponsored
