Sway bar switch flashing

[Zelaya]

Hi guys! Recently I installed a warn winch to JT and right after installing it, I noticed the sway bar switch was flashing. I have disconnected the battery terminals, and reset my Tazer and nothing works. I traced back the installation and wiring and unplugged the sway bar under the shield. Has someone experienced something like this or it's just a coincidence? Any helpful information will be appreciated.

Sponsored

 

[DylanM]

With it happening right after the winch install, my guess is you accidentally pinched or smashed the swaybar wire harness. It might help to pull your codes to see if anything swaybar-specific is kicking out.

 

[Zelaya]

With it happening right after the winch install, my guess is you accidentally pinched or smashed the swaybar wire harness. It might help to pull your codes to see if anything swaybar-specific is kicking out.

Thanks for your reply, I don't know. I will need to check the code. I hope is an easy fix.

Sponsored