TPMS issue

[dbstang]

So i just bought and put on new Wheels and tires from Custom Offsets. Got the package with mounting, lugs, and TPMS Sensors installed. Arrived and removed stock wheels and tires and put new ones on. Now i get the FTM blinking when the car starts up and then constant after 90 sec.

Pressures readsfine and if I air up or down new pressure reads within 1/4 mile of driving.

Butttt they are reading on wrong side. Right side tires show up as left side on the display and left sidedsshow up on Right on display. I know this because I aired up and down each tire individually to see what the display is doing.

Any ideas. I cant find where the whole system can be reset.

Will a battery disconnect do it.?

Do i need a dealer visit?

Sponsored

 

[Retro Bait]

I am pretty sure you have to run at a speed above maybe 20mph constantly for 10 min. for a relearn. My new ones set up on their own after 12 miles and learned their positions.

 

[bastage]

Same issue for me with a setup bought from custom offsets except it was only the rear that showed up on the wrong sides.. I ended up Disabling the TPMS with my Tazer after weeks if trying different things.

Sponsored