mr. cob
Well-Known Member
- First Name
- Dave
- Joined
- Apr 22, 2022
- Threads
- 20
- Messages
- 132
- Reaction score
- 151
- Location
- Washington State, Granite Falls
- Website
- mr-cob.smugmug.com
- Vehicle(s)
- 2021, Gladiator, Rubicon, Snazzberry, MANY others
- Occupation
- retired
- Thread starter
- #1
Howdy All,
I swapped the stock plastic bumper on my 2021 Rubicon, for a brand new factory steel Rubicon bumper when I installed the winch. The steel bumper came with LED fog lights, the plastic bumper had Halogen, at the time I did the swap I didn't know about the different lights, I plugged the steel bumper wire into the wire coming from the truck, turned on the fog lights, they worked, I shut them off, they haven't worked since.
So I bought a TAZER, read here on this forum and in an email from TAZER that the TAZER would allow the LED fog lights to work. I installed the TAZER, followed the instructions, the LED fog lights do not work, I redid the TAZER three times in case I missed something, lights don't work. So I either screwed up the TAZER install, must have burnt out a fuse if there is one, or burnt out the LED bulbs.
Looked for and can't find a fuse, don't have the knowledge or tools to do any testing, so kinda turning in the wind at this point. If there is a fuse sure would like to know where or what number it is. Thanks for any advise you can give.
Dave
I swapped the stock plastic bumper on my 2021 Rubicon, for a brand new factory steel Rubicon bumper when I installed the winch. The steel bumper came with LED fog lights, the plastic bumper had Halogen, at the time I did the swap I didn't know about the different lights, I plugged the steel bumper wire into the wire coming from the truck, turned on the fog lights, they worked, I shut them off, they haven't worked since.
So I bought a TAZER, read here on this forum and in an email from TAZER that the TAZER would allow the LED fog lights to work. I installed the TAZER, followed the instructions, the LED fog lights do not work, I redid the TAZER three times in case I missed something, lights don't work. So I either screwed up the TAZER install, must have burnt out a fuse if there is one, or burnt out the LED bulbs.
Looked for and can't find a fuse, don't have the knowledge or tools to do any testing, so kinda turning in the wind at this point. If there is a fuse sure would like to know where or what number it is. Thanks for any advise you can give.
Dave
Sponsored