Cowl Mounted Light Bracket Pair for JL/JT - Exceed Fab

[Exceed Fabrication]

$42.99 for a pair

https://exceedfab.com/products/cowl-mounted-light-bracket-pair-for-jl-jt

• Fits 2018-2024 Wrangler JL & 2020-2024 Glaidiator JT, not fits 4xe, mojave, 392
• Removable stainless steel logo plate
• Aluminum alloy with matte black powder coating, lightweight and high strength
• Multiple custom pod mounting positions
• Supports dual pods
• Includes a pair of pod brackets and all mounting hardware
• Three-year limited warranty on structure, three-year warranty on powder coating

Sponsored

 

[Exceed Fabrication]

 

[JCappy]

Too bad you don't make these for us Mojave owners.

 

[Jobofly]

Are you making a set for Mojave owners?

 

[Figmo]

can that side mount be used as an antenna mount? (GMRS and/or CB)

 

[Exceed Fabrication]

Too bad you don't make these for us Mojave owners.

We are missing cowl data for Mojave, if you are near CA please let me know!

 

[Exceed Fabrication]

can that side mount be used as an antenna mount? (GMRS and/or CB)

It depends on your thread size.
This pod bracket currently supports up to 8mm screws. If the original screws of your pods exceed 8mm, we also provide 4 sets of M8 screws in each package for replacement.

 

[SamO.5]

Better and more photos on the website.
Exactly what I was looking for. I signed up for an account on there, and bookmarked it. Thanks. Ill be back, am on Med Leave from work right now ($$)

 

[SamO.5]

$42.99 for a pair

https://exceedfab.com/products/cowl-mounted-light-bracket-pair-for-jl-jt

• Fits 2018-2024 Wrangler JL & 2020-2024 Glaidiator JT, not fits 4xe, mojave, 392
• Removable stainless steel logo plate
• Aluminum alloy with matte black powder coating, lightweight and high strength
• Multiple custom pod mounting positions
• Supports dual pods
• Includes a pair of pod brackets and all mounting hardware
• Three-year limited warranty on structure, three-year warranty on powder coating

The lower pod light holder slides up/down?

 

[msiminoff]

We are missing cowl data for Mojave, if you are near CA please let me know!

I have a Mojave and live in California... where is your facility?

 

[Exceed Fabrication]

 

[Exceed Fabrication]

The lower pod light holder slides up/down?

Yes! That's why we designed it this way!
The holder can move up and down about 0.8 inches, and you can install it upside down to make your pod lower!

 

[Exceed Fabrication]

I have a Mojave and live in California... where is your facility?

That's great! Please let me check with my colleagues and I will PM you if I need anything!
Our warehouse is in Rancho Cucamonga

 

[Exceed Fabrication]

We just did some testing and took some photos, hope it helps!
Apparently the windshield cannot be folded with the upper pod installed, and probably all the other brackets on the market cannot.
But after removing the pod, the windshield still has about 0.4 inches of clearance after folding, and it won't hit the bracket. Of course, we don't recommend doing this, because you're not sure if it will cause the glass to hit the bracket during aggressive off-roading. But it's a fun thing to try!

 

[Exceed Fabrication]

Some people were worried whether the bracket would be too high, we designed it so that customers can easily remove and install the pods without removing the bracket. We got Baja LP6, Diode SS5, Morimoto 4banger to test, and one thing I must clarify is that I think it actually looks bigger than the photo. If you care about the field of view, we recommend installing pods of 5 inches or less and installing them on the slope of the bracket as shown in the picture.

Sponsored