Sweetums
Well-Known Member
Well, that's a bummer, I haven't even taken mine out of the bag yet to install it, figured it would be one of those "as long as it's apart" projects. If I have to rewire it, I will.If you are talking about the one I think you may be asking about - beware, they use wire that's waay too big, and it doesn't fit the terminals, and the terminal crimps are awful - not done by the correct tool.
They need to use much smaller wire (18 gauge TOPS, even 20 would work) and the correct crimp tool and a relay half that size is more than enough. These are LED, not high wattage aircraft lights.
The wires come out of the pins very easily.
Proper size wires for the pins/terminals and a proper crimp tool would prevent this mess -
![]()
Drop down a gauge or so - would be a lot better. This is way overkill for our electric system needs - and that wire is way too big for the terminals -
![]()
Literally came apart days after install.
I have everything I need to make my own - including the correct size wire in silicon, just need to get some of the pins because I don't have the correct ones for these connectors (I have a great selection, just not these)
Next time, I follow my rule - want it done right, do it yourself...........
Sponsored