LCA Rubbing with 1.5 spacer and 315s

[hoodyhoo]

Getting some LCA rubbing at close to lock with 1.5 spacers on 315s. Would going to a tubular style LCA like the ones pictured stop the rubbing and also benefit from added caster?

Sponsored

 

[Rock Krawler Suspension]

1.5" Spring spacers or wheel spacers? Are you running factory wheels?

Factory wheel backspace is 6.25" and it's unlikely that you'll find a lower control arm that will not rub on a nearly 35" tire with 6.25BS. The factory arms will have the most clearance, from what I have seen. The easy solution is a wheel spacer to push the wheels outboard and gain clearance.

 

[hoodyhoo]

1.5" Spring spacers or wheel spacers? Are you running factory wheels?

Factory wheel backspace is 6.25" and it's unlikely that you'll find a lower control arm that will not rub on a nearly 35" tire with 6.25BS. The factory arms will have the most clearance, from what I have seen. The easy solution is a wheel spacer to push the wheels outboard and gain clearance.

Thanks for the reply, they are spring spacers yes factory wheels. I figured wheel spacers would be the answer was just hoping a tubular LCA would do the trick.

Sponsored