Recent content by Ssober

my daughter got her jk at 15

I just purchased a new to me alu-cab contour canopy. Is anyone building a product similar to the ammo box slide that alu-cab sells? I use packouts and would prefer to use them over the ammo boxes and I don't find dimensions.

In normal travel is why a spare might be nice. It could be dropped when you need clearance. 90% of the time these trucks are street driven 10% they need clearance.

So what about the spare with the hitch?

does it work with the stock location of the spare tire?

Why is the ground hooked up from the aux battery? That is part of the delete

What is the little black thing in the corner of the pic. It looks like a chair?

My daughter's 15 3.6 jk spit a #6 valve seat at 48,000. I had them do rocker arms and an oil cooler.

message sent on the canopy

on the fb group jeep gladiator overlanding there is an rsi smartcap in albuquerque.

watch fb marketplace. they are always in tx. I live in northern, ok and always see them in and around the metroplex. I think there is one near el paso I have seen somewhere

I broke down and took to the dealer. Drivetrain control module.

I have tracked it down to a voltage drop. The transfer case sensor just drops voltage every so often. I tried the sensor and it still does it so I take the sensor out off the tree. I toned the power wire and it toned to up by the fuse box. Ground cannot tone. I guess start shaking connectors

Abs wire was a splice on the vehicle side. Funny thing is I tested it both ways and the way I wired it is how it turned out the light and how it looked like it ripped out. Driveshaft was straight forward. Unbolt the shaft, knock the nut off, tap the flange, install the yolk, tighten the nut.

2020 rubicon, metalcloak 3.5 gamchanger 3.5, adams front driveshaft, apex 2.5t steering, aal front bumper with winch While doing installation instructions damaged the truck side of the front abs sensor wire, I replaced the connector and cleared codes but I am still lit up like a Christmas...