Search results

Thank you all for your replies. Two noob questions (I am new wrenching on my truck). 1. Can I adjust the shocks without lifting the truck or do I need to lift/jack up the truck to rotate the bottom portion of the shock. 2. When I want to rotate them to Soft, is it 180 degrees or 360 degrees...

I installed my Falcon SP2 3.3 A-adapt shocks last year. The shop that installed it, set it to the Performance mode instead of soft mode. Their rational was that with 37" tires and potential payload, it will better. However, I am feeling like the truck is rougher than it should be. It's fine...

thanks!!Appreciate the note about the shock. Overall I am happy with the way it turned out and where I ended up with the hose coupling.

I finished the install and connected to the 5a connector. Everything works so far. Will report back if it gives me issues.

Thanks!!

I am finishing up my Arb dual air compressor and want to connect it to my Auxbeam switch. I wanted to find out what amperage do I need to hook the purple wire to? Auxbeam has 5/10/20/30 amp fuses/connectors. I briefly connected it to the 20A and it worked but wanted to know if I should go higher...

Finally was able to install it. Had to move the top of the Falcon by unscrewing the top bolt. Once did that, it was easy…..

Unfortunately on mine, there is zero clearance and I can't get it to go. Not sure what the difference is.

Thanks!

Will it work with dropping the shock??

I am trying to do a Grimm off-road Arb dual compressor install and can get the bracket and the compressor to fit with my flacon 3.3 piggy back shocks. On Northridge 4x4 it says they are compatible but I can’t make it work. The compressor hit the piggy back and I can’t align the holes of the...

I installed the Z automotive camera wiring on my 8.4 Uconnect so that I can add a bed cam to the truck. When I have longer items in the bed that requires the tailgate to be down, it renders the rear camera useless since it's pointing down. I would like to install a camera inside the the cab...

As the title says, I am having a hard time deciding where to put the compressor. I know I dont want it in the cab since I have young kids and don't want to potentially wake them up if they are sleeping to air up or down. That leaves the wheel well, engine bay or the bed. Not too excited about...

Thank you all for your feedback including @JeepCares for offering to help. The dealer checked both batteries and deemed that both needed to be replaced. Both were replaced under warranty which was great. Also had the oil changed and rotated the tires which happen to be 37s under Jeep Wave...

So my truck sat for couple of weeks about 4 months ago. I had to jump start it and it was working fine after that, I purchased a Noco battery charger which the truck is hooked up to 24/7 when it's not being used (it's not my daily driver). I havent connected a meter to it so I am not sure if...

So I have a appointment for the dealer to look at my stop/start warning I am getting which has disabled the system. I am guessing it's related to AUX battery going bad. I wanted to find out if the dealers give people a hard time about AUX battery not working if you have accessories installed. I...

- Insurance (~700) - Registration (~490) - Maintenance (~300) So roughly about 1,500 annually.

I have a MB GLC350e that is paid off and the manufacturer warranty is set to expire next month. I purchased it new 4 years ago and I have been the only owner. It was originally intended for commuting but when Covid happened and I started working from home, it has become our back up car. It has...

Thats what I ended up with as well along with Clayton 3.5 lifts and Falcon Adapt shocks. I also installed a falcon stabilizer and Rockjock steering system.

To be honest, no. I don’t feel any major difference. I installed it along with several upgrades so I can’t tell what’s attributing to what. I think the peace of mind was probably worth it but ride wise, maybe not so much.