Search results

Heat is going to be the limiting factor. I added an oil bypass with cooler. I can keep oil temperatures down by 10* to 15*. The bad side is the emissions system does not like the lower temps. Lower speeds is the best fix. JT weighs about 7k. Trailer weighs about 4K.

The breather on the rear axle, based on the pic. Oil on the driver side of engine could be from an oil filter change.

5 to 7k when using Redline. Less when using Penzoil.

Yes, still have the same setup. I would just run the Amsoil bypass filter housing as is without changing the hole size. The hole size does restrict flow. This last oil change I used the factory spec. Pennzoil. If oil temps are above *240 I loose about 3psi on the oil pressure gauge. This didn’t...

AEV with spacer and/or fender chop.

Nope. They are really “Sold”

ID bypass/micro-filter housing. The O-ring gasket.

I wish you luck. Hopefully ID improved the design of the by-pass filter housing. My description of the ID system I just sold on this forum. “Full disclosure. This system worked as advertised from ID with one exception. I live at elevation, in the mountains of central New Mexico. I’ve...

If the Test Station said it needs to complete a cycle to pass. I would think a discounted retest should be offered. What cycle needs to be completed? I would try to get the Tazer back from the dealer that took it out. Maybe your speedo is off causing a problem.

You should still have the warranty from Jeep. Think all manufacturers emissions warranty go for 7 years. Why did they take out the Tazer? The Tazer would have nothing to do with emissions/ECM. Maybe gear and tire ratios are off causing the problem?

All the 76 stations and 7-Elevens had R99 in the Bay Area when I lived there a few years back. Everything I’ve read on it says it’s better than #2. Way higher Cetane and it’s all fresh. Others on the forum have had great success with it. Would not do the B20.

Replied to PM. Yes still available.

Mine was ordered by the dealer 2nd week of November. Talked to the parts department today. Said 4 part #’s had been ordered for the recall fix. Had the pump and 2 other small parts. Waiting on an EGR gasket. Computer said 12/14 delivery. When I originally took the JT in for recall appointment...

Sold

That’s what my Builder friend said.

Confirmed. Not hydraulic. Nitrogen filled foam.

Thanks. I thought I read when purchased “hydraulic”. Just couldn’t change pressure. I will confirm and update.

It’s been awhile. I need to update my ID bypass oil filter plus oil cooler experience posted earlier in this thread. The short Version….the ID part of the system has been removed and replaced with a universal Amsoil oil bypass system. The ID bypass oil filter housing would leak at the first...

I have an Insane Diesel oil bypass kit for sale. This was installed on my ‘21 JTRD for about a year. I also had an oil cooler installed with the system. Not from ID. Full disclosure. This system worked as advertised from ID with one exception. I live at elevation, in the mountains of central...