Search results

Thank you! Anyone else have one of these mounted inside the vehicle?

Does anyone have the Bluetti Charger 2 (or similar charger) mounted inside their vehicle? I don't have a cap on the bed, so I need to keep it inside where it's dry. Also it isn't practical for me to remove the back seats. I'm looking for ideas on where to mount it.

Thanks. That’s really good to know. I’m very interested in the Trade Wind, although I’ve been concerned about the weight. I’m pretty annoyed by the squat my Rubicon has when I have stuff in the back — especially my rooftop tent and rack. I’m probably going to get heavier springs to fix that. I’m...

I’m going to try to find one to rent — ideally somewhere in the Colorado area.

Thanks. This has been my gut feeling as well. That is a fantastic idea! It didn't even occur to me to look there. Thank you!

Thank you to both of you. I don’t want to appear ungrateful, but I’m really hoping to hear from people that have actually towed a 23’ Airstream with their Gladiator. I know the specs, I’ve done a lot of long distance towing, and I’m already aware of the factors that could make this truck and...

I'm in the market for an Airstream travel trailer, and have settled on a 23 foot front bedroom configuration (23FB). All of the models with this floorplan are at the upper end of the towing weight range of a 2021 Rubicon, some closer to the top than others. I'm curious what the towing...

Mine are 4.5 years old and are working perfectly.

A møøse once bit my sister… IYKYK (Sorry, couldn't resist.) :)

Same for my 2021 Rubicon.

I would never have guessed that it would work under the roof. I know the roof is fiberglass and all, but I still didn't expect it to work. This is great info! Thank you!

Interesting! I'll definitely try that the next time the hose breaks on mine.

I have done Pole Hill several times. It is a nice drive. Not extreme at all. There is a somewhat rocky hill you need to drive up right after the trailhead, but it isn't particularly difficult and a piece of cake for a stock Rubi.

I'm running 5.13 gears with 35s, and I am absolutely delighted with the setup. There's no downside whatsoever. I'd do it again in a heartbeat.

https://www.co4x4rnr.org/ can help.

Which offset option?

I thought I'd post an update just for the benefit of others that might have this question in the future. It took somewhere between one and two thousand miles, but the transmission eventually learned how to behave with the new gearing and settled down. Now it shifts all the way up into 8th gear...

I recently changed to 5.13 on my JTR with 35s. I've driven close to 700 miles, and the transmission is still unhappy. It's holding gears unnecessarily (for example yesterday I needed to force it to upshift from 5th to 6th at around 70mph). Also it sometimes shifts down to 1st gear when stopping...

Right around 3500 rpm in 6th at 70 mph.

Was the speedo way off without the gear programming? Mine is correct, which is why I’ve been confident that they did it correctly. But they told me it would immediately start limping, and it sounds like they’re wrong about that. I bought a flashcal from them because I forgot my obd widget for JScan.