Search results

Sorry if you can afford this vehicle even it's its cheapest bare bones model you should be able to shell out $350 to $400 dollars for a straight bolt on item that is designed and dedicated to fit the vehicle. Putting on something like the example the OP posted will not straight bolt on, require...

You have a nice ass Gladiator and you want to put some cheap ass universal steps on it??? You need to stop being cheap and drop the extra money for some real steps. I grabbed some N-Fabs for less than $400.

I got A set of Rubicon Rock rails not not the rear ones if your interested. Located in middle Georgia

Selling my OEM Rubicon Rock Rails. Took them off with less than 300 miles on the odometer. Rails are in like new condition and will come with OEM bolts and Nuts local pick up $200 here in middle Georgia :) hit me up Gladiators

bump :)

It’s slightly shorter and narrower and less thick as the oem shell. The internals are pretty big and it uses a large coin battery. I don’t think AJT could make it any smaller.

Yeah mine set to 32 cold reach about 37 to 38 hot in this Georgia 98 degree weather

I am seeing a crazy range of Tire pressure from below 30 all the way to past 42. Can't this also be of concern?

What tire pressure are all of you running with 33” Falken Wildpeaks ? Dealer delivered it to me with 42 psi which I immediately brought it down to 32PSI cold temps. I’m just wondering what the rest of you are running with your gladiators :)

Custom keyfob :)

Selling a custom set of JW Speakers with morimoto adapter buckets. I attached multiple photos. They are plug and play. Bolt them right on. No computer reprogramming needed with either a Tazr or flashcal. Wife wanted lights with Halo’s so had to spend more money to make her happy :) Asking for...

PlastiDipped my key fob and some more vinyl

Thanks man I appreciate it :D

Thus the Punisher was born!!

I made my own today :)

I took a the permanent route and took shears to the plastic by where the pin is. Cover is gone and it’s like it never happened :)

Thanks man Much appreciated

I did the red myself. I cut the Red Vinyl out with my Machine then I applied 3 coats of TopCoat Clear only on the middle rectangular area. Let it dry for a few hours and installed. Reason for the clear coat was since this will get stepped on or scuffed, I didn't want the vinyl to easily peel...

Few more vinyl touches and some awesome grab handles :). Next Up is removing the rubicon vinyl and are placing it with my own cut out. I named my Gladiator “Punisher”. Why because the punisher is bad ass

I used duplicolor caliper paint from auto zone. I did the brush on type instead of spray paint. I did two good coats on all of them and let them dry for 24hrs before I drove.