Sponsored

Search results

  1. Negative wheel offset vs factory positive offset

    I believe that Sport S has the standard width axles, while your Mojave has the wide track axles that I think are ~3/4" to 7/8" wider per side. I don't know if the high clearance fenders on your Mojave are any wider than the standard fenders.

  2. 3x3 Cube Lights - Need Help finding alternatives on a 2024 Mojave

    So you have these brackets that are designed specifically for the Baja Designs D series lights? You'll need to find lights that are less than 1.93" wide so that they will fit between the two brackets, plus some washers / spacers to fill in any gaps. You wrote that you "received" these, so I'm...

  3. Adding 12V to bed for Jackery & Fridge with Aux circuit

    What is the current draw of the fridge you are considering using? (For reference, the new Dometic CFX5 55IM we just got is rated as 8.5A at 12V DC). What is the current draw of the DC input of the Jackery unit if that you are considering using? If it is going to want to pull 15 or 20 A from...

  4. Just got my 2 inch mopar lift kit. Anything Extra I would need?

    If you got the version of the kit with the remote reservoir shocks, then this post: https://www.jeepgladiatorforum.com/forum/threads/mopar-2-lift-with-fox-or-bilstein-shocks.89844/post-1442977 Has the Bilstein install instructions attached. Unless they've updated the instructions, a couple of...

  5. Standard (Imperial) or Metric Sockets?

    If you want 1/2" drive and all metric: Sunex 2569 6pt, standard and deep, 9mm - 24mm, plus 26, 27 and 30 mm.

  6. Running wires from the engine compartment to interior

    68336758AC Item #11 on this page: https://parts.allmoparparts.com/oem-parts/mopar-dash-panel-plug-68336758ac

  7. 34s

    Making the assumption that you want to keep your OE wheels, then 275/65R20 seems like a size with plenty of choices. https://tiresize.com/comparison/

  8. Shifter Release Cover No Longer Sitting Flush

    Available here: 6TV57TX7AA

  9. What Did you buy with all the Memorial Day Sales?

    Rock Slide Engineering step sliders and the armor / skid plates that mount to them.

  10. O

  11. Core 4x4 front sway bar end links

    They are on sale right now, 10 to 20% off depending on which series (cruise, camp, crawl) you want.

  12. Using AUX to power Wolfbox 930

    Your owners manual should have information like this:

  13. Transmission oil change with PPE aluminum oil pan

    For anyone who has done this, how many quarts of new ATF should I have on hand when I go to install the PPE 850RE pan with the exhaust crossover clearance cutout for the 3.6L? Is six enough? Or should I get more than that?

  14. 🔧 2020-2023 JT Gladiator Torque Values (All of Them in One Place)

    The pattern and the specs are in the attached documents. I think @Hootbro posted these in some thread on here. Note that the torque spec given is for new bolts, that have the pre-applied thread locker. I scanned a page of the instructions that come with the Dana/Spicer bolt kit, they want you to...

  15. Does anyone know the part number of this screw?

    Part number 6 in this diagram: Torx Head Screw
  16.

    Moab Bound -- with the wife in tow.......

    We did a CC loop up Gemini Bridges road, to 313, then down Long Canyon back to the river. Chicken Corners. Shafer basin.

  17. O

    I-75 NB in MI:

  18. diff time- can you confirm this is correct?

    The squeeze pouch makes things easier: Valvoline-SynPower-75W-90-Synthetic

  19. Is this the plug that people are removing to run wiring through the firewall?

    Need to turn that plug about 1/8 th of a turn. The hole in the firewall isn't round, it has four notches in it. The back (cabin) side of that plug has four sloped ramps and two sets of prongs. Turning the plug lines the ramps and prongs up with the notches and it will come out.

  20. Wiring Switch (wiring) into Viar VMS 400 Dual Air Compressors. HELP!

    If you are going to use an sPOD output to turn the compressors on and off, then you won't use the supplied rocker switch at all. The wiring diagram / schematic shows a pressure switch but the photos don't show where that is at in your setup. Is it on a remote air tank or some kind of air...




Top