Sponsored

Search results

  1. The pilot test for our T-slot bases was a success! Install your bed rack on the T-slot channel of your cover.

    I thought so when I bought it. I didn’t know it at the time, it was a prototype, just thought it was one of the first ones
  2. The pilot test for our T-slot bases was a success! Install your bed rack on the T-slot channel of your cover.

    Sorry for the delay. Yes thats The truck and rack that started the thread. Its been great, the rack is mounted to my Roll n Lock and was solid though the mountain’s in a snow storm and off roading in Moab. About 500 miles on it since with a 200 lb tent on the back with no issues on the rack or...
  3. The pilot test for our T-slot bases was a success! Install your bed rack on the T-slot channel of your cover.

    Yes, I guess I was the first one to get the t-slots, in the beginning of this thread. rack is mounted to a roll n lock with t slots
  4. The pilot test for our T-slot bases was a success! Install your bed rack on the T-slot channel of your cover.

    Added the tent. Just an inch to high for the garage. Drives great, rack is solid on the Roll n Lock
  5. Mopar 2" lift spring upgrade after overlanding setup

    I have instructions and part numbers for the non-diesel version. Can't find any instructions or part numbers for the eco diesel 2" lift
  6. The pilot test for our T-slot bases was a success! Install your bed rack on the T-slot channel of your cover.

    I moved the top bars out for the rtt since this picture was taken. yes they are easy to move and to extend as well
  7. Mopar 2" lift spring upgrade after overlanding setup

    Are the Mopar 2” lift Diesel springs available as stand alone parts?
  8. Mopar 2" lift spring upgrade after overlanding setup

    Thanks', I will check them out. Work in Progress. I now may need to get a shorter Rack. Wont fit in the garage by 1 inch. , and after bringing the rear up, it probably will be 2-3 inches to high.
  9. Mopar 2" lift spring upgrade after overlanding setup

    Thinking that if I could get the springs for the 2" lift diesel, that would keep the ride and give me more load capacity. Leveling kit won't increase the capacity. Not sure if they are even available separately.
  10. Mopar 2" lift spring upgrade after overlanding setup

    Have a 2020 Overland with a 2 " Mopar lift and 35's. The on and offload driving and handling has been great and I have had no complaints. Just added a Tuwa Pro Rack and a 23 Zero Armadillo-A, adding about another 300 lbs. to the rear axel and a fridge, kitchen, sleeping gear and clothing are...
  11. Bolt hood lock, worth it!

    I feel very secure with mine
  12. The pilot test for our T-slot bases was a success! Install your bed rack on the T-slot channel of your cover.

    I can see under it more than I can see over it. Enough to know there’s a vehicle there. that’s OK because there will be a rooftop tent that will block above once it’s installed.
  13. The pilot test for our T-slot bases was a success! Install your bed rack on the T-slot channel of your cover.

    That was the original plan. Went back before i headed home. Learned a few things the hard and expensive way.
  14. Locks that work with your Gladiator key.

    Bolt Lock and MOPAR Gas Cap
  15. Start//stop not working battery charging

    Mine went out at about the same time and now two years later it’s happening again. I travel weekly and the JT sets at the airport for three days. Took it to the dealership and they said the batteries were severely discharged (no s#!+) but they charged them and it worked. They blame it on the...
  16. Wachuko's Mojave Build Thread

    Guys, Looking at the Go Rhino XRS exactly like you both have, Also looking at the same thing in a Billie Bar setup and a Tuwa half rack that mounts to the T-slots. Question, How are the Go Rhino bars and mounts holding up off-road? I read in another post that the welds broke on one of the...




Top