Mopar 2" lift spring upgrade after overlanding setup

[Readyt]

Have a 2020 Overland with a 2 " Mopar lift and 35's. The on and offload driving and handling has been great and I have had no complaints. Just added a Tuwa Pro Rack and a 23 Zero Armadillo-A, adding about another 300 lbs. to the rear axel and a fridge, kitchen, sleeping gear and clothing are coming. Right now it sags slightly, and its noticeable. I don't want it any higher, just level , get the firm ride back and capable of more weight. Was wondering if the 2" Mopar lift rear springs for the diesel would work, (If they are available separately) or any other suggestions.

Sponsored

 

[ArchEtech]

Can’t you get leveling kits? You could also trying a slightly suffer spring? I’m assuming take offs from max towing wouldn’t work with lift.

 

[Readyt]

Thinking that if I could get the springs for the 2" lift diesel, that would keep the ride and give me more load capacity. Leveling kit won't increase the capacity. Not sure if they are even available separately.

 

[Silverator]

One word : Clayton!! Good luck with your rig. It's beautiful..

 

[Readyt]

Thanks', I will check them out. Work in Progress. I now may need to get a shorter Rack. Wont fit in the garage by 1 inch. , and after bringing the rear up, it probably will be 2-3 inches to high.

 

[813 Fabrication & Design]

I started with a Mopar 2” so there are still some of the components there. I swapped to Dobinson HD springs. 3” in front 2” in back and it sits perfect. I also now have Fox 2.5 shocks so not sure if the springs work with stock shocks.

 

[dayusmc]

I jad the Clayton and took them out and installed the Mopar springs because for street driving the Clayton's rode horrible.
The Mopar diesel rear springs are supposed to be a hair stiffer than the gas ones. Maybe those springs and a .75" spacer in the back ..

It really depends how much you value your comfort driving on the street...

 

[Readyt]

Are the Mopar 2” lift Diesel springs available as stand alone parts?

 

[dayusmc]

Yes, look in the instructions, they list the part numbers.

 

[Readyt]

Yes, look in the instructions, they list the part numbers.

I have instructions and part numbers for the non-diesel version. Can't find any instructions or part numbers for the eco diesel 2" lift

 

[Josh00333]

Skip the mopar stuff, get a set of Claton or or AEV rear springs. They are both night and day better than the factory stuff.

Sponsored