Search results

If you were on the parkway was this a federal ranger that pulled you, or state / local? Federal Rangers have zero tolerance. Just curious, thanks

Thank you, can't wait to see the rear enclosure on the 22 !

Hi @KB Voodoo . Does tonneau compatible include the factory mopar roll up with this new rack? Also, what is the minimum height to get the side opening (rear too if available) panels? Thanks

Nice rig! Enjoy

Can I ask what was said about not having your factory rock rails? I also do not have mine and interested in these. Thanks Edit: Sorry, I think he says in the video they mount with or without original slider. Thanks

Good to hear I'm not the only one

BFG ?

Preventative maintenance. New HD Dynatrac Ball Joints, just turned 80k miles, 65k of it with 37s on the stock ball joints, truck steering feels tighter over the washboards.

Just turned 60k miles on my BFG KO2s so will be replacing with the same. Probably have ~ 10k left

Don't have experience with others, but really like my factory roll up, find myself not wanting most racks because there not compatible though, but if rack is not a consideration then I recommend it.

Benny has helpedme with odd parts , mopar parts forum sponsor

You can do yourself if no hurry, a helper just to hold / pass tools is a huge plus. I recommend good jack stands, know how high you will need them to be before you set them, a good, smooth, floor jack or two. Research RC website to learn what you have and it's components so you know what needs...

I have a stock set of rubicon front springs, upper control arms, and track bar you can have free if your near Southwest Virginia. Also 4 original Rubicon Fox shocks, but they are worn and do not have many miles left if that helps. If the un-lift is DIY you can ask questions here, my experience...

Took the stock Rubicon Fox shocks off and replaced with new Fox 2.0 at 70k miles, nicer ride and helped with the body roll, still some there but not experienced enough with shocks to give a more detailed review. Will stick with these Fox 2.0 going forward.

Adding floor insulation sounds good, wonder if you can add anything to the roof which you may have already said. I have not used my propex in temps that low, you two are tough. Let us know, hoping the insulation is a win for you two. Man that's cold, hope the tent insulation makes the...

Gas or hybird with more torque. 2000 watt power from the outlet in the bed. Power rear window. Steering wheel radio volume on the left. One reasonable dealer (or jeep service center no dealer)within 100 miles.

Camper is 16' long x 7' wide x 6' high (height varies, so 6' est avg). I had this set at 70 degrees from about 7 p.m. to 9 p.m. and then 65 degrees all night so about 10 hours total run time each night. Let me know if I can help further, it was an expensive investment for me so I was nervous...

I use a propex for my camper, 3 nights with temps in the low 30s and used 2-1/2 gallons of propane (half a 20 lb tank), purchased from Van Cafe online. Digital thermostat is nice, propane air locks happen easily each time you reconnect to the propane tank, but just have to reconnect 3-4 times, I...

Congratulations, nice looking rig

You can tag them it may help them see your questions sooner, @Clayton Off Road