Search results

I ended up changing plans for my lift and am selling a pair of rear upper and lower control arms for Rock Krawlers 3.0" X-Factor lift. Both sets were purchased in September 2021 and are new in box. Part numbers are below: Rear Upper Control Arms - RK07386 Rear Lower Control Arms - RK07380B I...

I am selling the factory Rubicon axles out of my 2020 Gladiator. The axles are stock with 4.10 gears and e-lockes front and rear and are in great shape with 22,000 miles on them. The axles are complete and will include brakes, calipers, tie rod, track bar, and steering stabiilzer. Asking...

I have a JCR Offroad Front Dagger Bumper with the stinger, lower skid plate, and winch fairlead mount(all powder coated) for sale. I purchased the bumper in late 2020 and had it on for about a month before deciding to go a different route. The bumper has been stored in my garage since then and...

5" of backspacing is still quite a bit, I bet it will work well and good luck on the axles, I really hope things start flowing a little more smoothly.

No doubt, I ordered my axles in June and just got them in this week.

Have you spoken to Clayton about what they recommend? I believe the factory axles are 68", so the Dynatrac axles will be 1/2 wider total, or 1/4" per side to give you room for a bit more offset. Rock Krawler recommends 4.5" BS with their 3" kit, which would translate to 4.75" BS on a Dynatrac...

What would you like to know? It gained me an additional 6" on the sides and 6.5" on the rear at the receiver. I worked with a bumper guy here in New Mexico and am happy to provide any info I can. He is a great person to work with.

It's not a bed chop, but I finally wrapped up a high clearance rear bumper that included trimming 7" off the bottom of the rear fender. It took a lot longer and several attempts to get it how I wanted it, but I am thrilled with how it turned out. The sides are now even with the bottom of the...

I did get it bare and have it powder coated locally. IT really worked out perfect though, because it allowed me to clean up the welds and open the fog light holes for bigger lights! Winch is a Warn 12-s. Thanks!

I really think LP6's would be a perfect fit on the bumper. The LP9's throw an incredible amount of light, but they are massive. I did not get their skid and can't comment on it. I rotated my swaybar motor and chopped the skid mounts, so no skid at the moment.

Have you looked at the Next Venture Motorsports Adventure Series? I finally got mine mounted up and am really impressed with the build quality and simplicity of it.

I have no idea why they wouldn't do this from the factory. It would be interesting to hear what their logic was in orienting it the way they did.

Reviving an old thread with the specs for the bolt: M10x1.50x100mm bolt, 2 - M10 flat washers, 1 - 3/8 x 2.25" split spacer.

I ordered a set of the Mopar LED's from Northridge and one of them had something wrong with the adjustment mechanism. Contacted Northridge and they were quick and responsive in getting me a replacement within a week. Thank you!