Front Axle Disconnect. I was reading up on what this is since the gladiator is my first Jeep. Essentially allows the front axle to not spin when in 2H to save MPGs. They have to cut a hole in the axle tube which they say can weaken the tube. This led to me reading way too much about FAB Deletes.
Yes, this. Basically I used a wire coat hanger to shove through the grommet under the dash on the passenger side. White so I could see it. Once I made it through (two pops, one inside and one exterior grommet) I crawled under the back side of the passenger tire. You can look up if you pull the...
Cool, lucky the NMO mount i have has really thin coax and connector, so I should be able to get it through there okay. Wish they made some kind of duplex/triplexer for using 2m/70cm with the broadcast radio and cb. i guess the problem is the 2m/70cm surrounds the VHF broadcast band. I'm...
Added the Topsy Products NMO mount for my ham radio antenna. Put down some 3M body tape so nothing happens to the fender. Next step is running the antenna coax and power inside the cab. This mount is perfect.
I mean, that’s the easy part. Scotch tap into the parking lights. I was trying to find some small LED light I could put in that area but all the off the shelf solutions are pretty large. Maybe a good future project when I’m settled after my upcoming move. Next project is getting my ham radio...