Search results

I think it’s a transmission -specific part. My sport manual trans doesn’t have the crossbeam.

I always thought those rubber plugs only kept mud/sand/wet inside the hitch. Since they mount from the back, they act to trap anything that gets in there while you’re driving forward.

Those that believe there are 2 types of people, and those that don’t.

Another aid in this battle and smells woodsy: Fresh Cab Botanical Rodent Repellent - Environmentally Friendly, Keeps Mice Out, 4 Scent Pouches https://a.co/d/hlcIxGq

Also have heard people positioning their 5th sensor in the spare such that’s closest to the license plate when tucked under the bed, to keep it further away from the actual wheel sensors.

Why not just buy a 5th tpms? They’re around $25 I think for the mopar ones.

I like it. Custom-fit skid plates, or even better special one of a kind trail editions!

I just went through this dilemma myself. It required a hard look in the mirror and some painful truth pills to swallow. 1. you can’t have your cake and eat it too. Heavier tires will absolutely affect MPG and driveability. No one can tell you whether you NOW think your truck is peppy or a dog...

Sorry to hear brother. For others that chose Rusty’s, I was doing the install on my own and didn’t want to take any chances on the control arms shifting when I removed the bolt. I stopped by the local hardware store and picked up a generic 4 inch bolt the same diameter as the control arm bolt...

In my last Subaru, I cut a horizontal slit in the trim around the center console, in the passenger footwell a couple of inches above where it meets the carpet. Then slipped the flap part of a 32oz Velcro Nalgene sleeve/holder through the slit and then re-attach the Velcro once it slipped out the...

I just installed my engine skid. Received wrong pitch M12 bolts, so had to track down the correct M12x1.5 40mm. NAPA had them, no luck at oreilly or Ace hardware. I’m kinda bummed at the ground clearance cost of this skid. I have manual transmission, so didn’t have the stock brace that...

Boil water, use aero press. As an espresso drinker, this is really up my alley. 17 thousand reviews and sitting at 5 stars. The coffee is excellent. AeroPress Original Coffee & Espresso Maker - Quickly makes delicious coffee without bitterness - 1 to 3 cups per pressing https://a.co/d/9dAe79X

You now have hot leads at your bumper, which are a fire risk in case of even a minor collision. A solenoid lets you keep the winch without power, until you actually need the winch. Many of us wire the solenoid to our Aux switches, so it’s trivial to send power to the winch even from inside the...

Walmart carries the Mopar MO-349 filter, $11. 5 quarts of your favorite 0w-20 ~$40.

It’s not sampling the oil, it’s using load, temps, mileage to determine the life remaining. How would it know that you changed the oil?

I’m aiming for 7500 interval, currently at around 7k miles myself, showing 30% life. The oil life indicator is almost certainly not linear. Typically I’d have no trouble with a 10k interval with synthetic oil, but 7500 looks more realistic with the Jeep. Going to do my own oil changes, got a...

Be mindful of the fact that the usb port in the console is flaky for many people , me included. I have the cplay2air mentioned above and it would drop connection every few minutes when plugged in the port inside the center console, yet is flawless when plugged into the one on the center stack

Great to hear, thank you all. Just ordered the short nipple version and the hose.

Now that the aluminum engine skid from quadratec is back in stock, I ordered mine. I also want to add a fumoto oil pan valve for easier oil changes. Wondering if anyone has installed the long nipple version of the F106 valve and if there is still room above the skid to accommodate the long...

Which tires are those? Love the look!