Search results

My center cap on my 702's is 3.235" to the mating surface to the wheel

I'm going with deer with an enlarged prostate...

Can also concur, my 42 MT's didn't require balancing either.. Discount put beads in them at the beginning. .Bad idea, I had them removed after the shakes wouldn't spin out to find out they didn't need any to begin with. Toyo will almost always get my money until I want something bigger, as a...

The ol'--Keep looking left while we go right! :headbang:

My FAD splines prolly look like that too...... Good to replace those shafts as failure would be likely inevitable. Shiny things, Got bored today, modeled and printed some pucks and did the rivnut conversion finally on the chop..

I've been running Doc's since my 4th oil change, just turned 125k and it hasn't blown up. I'm too lazy and cheap to do oil analysis since I will incur the cost whenever it blows up anyway. No sense to me to have a quarterly reminder it's coming someday and stressing out about it. money is put...

I had a clunk I couldn't find either, until I randomly did. My passenger side shock tower broke where the bung is the bolt goes into. Welded it back together and has been good since. Probably a stretch, but since the world at large thinks your clunk is an imaginary friend, might be something...

4.10 to 5.13= shaft spinning 1.25X faster than stock assuming no other changes (tires) Since most jeeps don't have AWD which yields a double ended CV shaft, I would surmise the vibration is the axle side shaft joint up front. If it isn't square to itself, at some speed it will vibrate. Mine...

Nope, nothing crazy, 42x13.5 on 8.5 702's 4.75"-5" backspace( can't remember) and 2" wheel spacers. Stick out isn't crazy at all. Doesn't fit into the teardrop car profile at all. Thank goodness!

The only issue I've had, my rig doesn't fit and has broken two auto washes so far so I don't go to them anymore ( asked both times before they sent me through). Each time it broke something related to the tire shine that was not requested, which resulted in that stuff in many more places than...

Went on a drive about on Friday/overnight into Saturday through Rampart Range, Hackett gulch and attempted to get over Mosquito Pass in the Friday night snow. Still quite a decent headwater flow on the south platte at the bottom of the gulch and ran into Rocky who got in my way heading up the...

Confirmed. I had the plastic prior.I'd sell ya mine since I need a narrower unit because 42's... But I'm sure you could find one close to home on the facebooks for cheap.

I did 3m Clear bra material. ran it all the way down behind the slider so when I kick the side of my truck it has some protection too. Year 4 and still holding strong. I think I bout something like an 8"x 48" roll to get it done.

Went out and fought with Mother Nature this weekend for camping rights... WE won... Also played with the buggy buddies big tire club with the grocery getter.