Search results

Adjusting the box only makes it feel heavier. Bought my new box from a dealer on line and changed it out myself. Only had 1000 miles on then. Handles much better

the roll bar was made at Jeep Armory, a fab place here in Michigan.

They are Die Tech Off-Road mirror brackets for the JK. Not sure if will fit on JT/JL

Are these replacing the Destroyer for the Gladiator?

:headbang:

Thank you

If that were the case you wouldn’t have steering if the vehicle was not on. The system works just like a vehicle with a belt driven pump.

The voltage should not have any effect on the looseness of the steering as it would only make a difference on how heavy or light the steering feels as there’s a direct connection between the steering wheel and the tires through the gear box. That would only make a difference if it where a full...

Was a fairly easy install, when I installed it did make it a little better. Need a 42mm socket to remove/reinstall pitman arm nut.

Put one on before I changed the box to see if would help.

took a couple of hours to change out, pitman arm came off with two jaw (Had regular pitman arm puller on standby buddy has one if it was to hard) went through 1.5 pints of Mopar's special fluid bleed out easy. Didn't remove all the loose feeling but about 75%. I do have a 2 1/2 inch lift and 35...

Sorry about post. Phone is skipping around post as I’m typing

Company I work for now changes core some sometimes with new parts release they want cores back to see where parts are failing.

Even new parts there is core changes.

Sorry, that is the correct part number

There all about the same. Core, shipping, tax and Mopar electric power steering fluid (around $18 a pint) was about $650.

first photo is old one second photo is new one

Installed my new gear box I ordered from Mopar parts online (tired of dealer not wanting to do anything saying nothing wrong and wanting to charge me as I have a lift) made a big difference on the dead spot in steering, more enjoyable to drive.

think OP will get that?

Just read through this thread and if you want to come out to where I live I can show you the dead spot in my box. Input shaft movement with no sector shaft movement (two inches of steering wheel movement). No amount of air pressure settings will fix. Dealer will not do anything, waiting on after...