Search results

I would assume that outrageous shipping charge is a glitch in their system. Some zip codes adjacent to 85086 show free shipping.

The sound is normal. It is the electronic throttle control.

After an IBS reset, the IBS needs to re-learn the battery SOC (state of charge). It should default to 80% SOC. But the FSM states that it may take some 'cycles' and some features (like the ESS) may not work until it updates. So, even if you immediately get the circled A, give it a cycle or...

I installed the Smart Stop Start on my 2021 Mojave about 4 years ago. Simple installation. It works great with not a single hiccup.

I replaced the 3.5" speakers in both the dash & sound bar with 3.5" Infinity Reference REF-3032cfx speakers (3 ohm).

For applying Boeshield, I use an old visine bottle with a red plastic sprayer extension from a can of brake cleaner. I applied the BS as far up on the seam as I could get, then I immediately repeatedly opened & closed the door to 'flex' the seam. It clicked for the first 5 or 6 open & closes...

Interesting. I wonder what about the ARB lockers makes them recommend 75W140. It is usually the bearings & gears that dictate the recommended fluid.

You can also use 75W90, which is usually more readily available. There has been quite a bit of discussion about using 75W140. Here is some good reading: https://www.jeepgladiatorforum.com/forum/threads/differential-fluid-for-towing-rubicon-50-towing.86137/

Here is the 3.6 oil pressure info per the FSM: For coolant temperature between 89-100C. Pressure @ Curb Idle Speed (650 RPM) = 15-34psi Pressure @ 1000-3000 RPM = 28-35psi Pressure Above 3500 RPM = 65-80psi

Agreed. I was surprised at how thorough SKF was with their review and I was confident in their findings. But, as always, buyer beware. Even with a major auto part retailer, you can't be sure of what you are getting. For example, I bought some Moog ball joints for a Dodge Ram that I had from...

My story: I purchased a pair of SKF front wheel bearing hub assemblies for my daughter's CX-5 from Walmart.com because they were really inexpensive. I figured if the price was too good to be true, then they were fakes and I could return them. Turns out they were legit parts. I had them...

Agreed. It looks like Remflex graphite exhaust gasket material. https://catalog.remflex.com/default.asp

Yeah, that's the new gasket that I posted way back in Post #6. ;)

I recall watching several JL/JT videos where they re-used the original pan gasket, which was a white-ish color IIRC. The new gasket I purchased is black (see post #6). My plan was to evaluate the existing gasket for re-use.

The euro factory LED rear fog lights will bolt right in place of the existing reflectors on the rear bumper. Part numbers are 68338390AA & 68338391AA. I also used license plate wiring harness 68349976AC which has the correct plugs to plug into the fog lights. I wired the fogs directly to the...

If you want some additional brake / turn signal lights, then the OEM rear LED fog lights can be installed in place of the rear reflectors and wired into the brake/signal circuit.

DEI makes some neat pipe shields: https://www.designengineering.com/heat-control/pipe-shields/

^^ I bought 7 just in case. Some people report using over 6 quarts to get to the correct level. I didn't want to have to get more if 6 wasn't enough.

I got the filter and pan gasket from my local dealership:

The JTs use the newer Dana AdvanTEK axles. I doubt the ball joints are the same - if they were, then TFlex would not have developed new ones.