Take a close look at the bearing surface size between the factory, OEM nuts, and the aftermarket. I have seen a substantial size differential where the aftermarket has a much smaller bearing surface than the factory. I have been very unimpressed with several sets that I have ordered and...
I must have missed it. I wanted to pass it along though since 3w has figured a way to move the windows wirelessly there may be a solution to do so for your application. That would solve the wiring issue you face with putting a remote switch / control on the driver’s door. Just trying to keep an...
https://www.jegs.com/i/Dorman-Products/326/901-405/10002/-1
https://www.jegs.com/i/Electric-Life/366/4990-10-421/10002/-1
Thinking buy a spare door card and install one of these as an alternative to the center console. Or something similar. Moves it to the left side and closer.
So far the freedom panels still look great. I think it is definitely a better way to go than the strips of adhesive. However, you have to remember that the covers do not completely conform to the fiberglass. In other words, if you try to press the cover down on all portions of the fiberglass...
I’ve witnessed interstate speed separation of the axle shaft and wheel from a Wrangler outsides of Asheville. While the two guys in it were definitely over the GVWR, the real cause of the failure was the ridiculous offset for the wheels. I watched from behind as the right rear wheel and axle...
Get a roof mounted fixed position spot. Drill through the fiberglass and go to town. In fact, you could put one on either freedom panel and have both sides covered. Or go thermal / FLIR. https://getnightride.com/
If memory serves the Oracle tails require swapping the proximity module from the OEM to the Oracle. So it is likely that Jeep has one LED tail design to reduce number of necessary parts.