Search results

I finally got around to installing some Tereflex 1” shims to remove the front end sag. I already had the Mopar lift on my Rubicon, this was just to get it to level. Front end still feels good, not enough to need adjustable arms I guess.

If they bring a 5.7 option, I will happily grab one.

Hey, sorry I missed your questions… If you look closely at the picture, you can see the prybar placement. You can just apply pressure, slide the belt off the compressor pulley with the other hand, and then release the prybar. The tensioner is spring loaded and just returns to its position when...

I did the Steersmarts Yeti trackbar and tie rod with the high mount for the Fox ATS. https://www.jeepgladiatorforum.com/forum/threads/fox-ats-stablizer-mounting.74937/post-1223213

You need to lengthen the track bar to move the axle to the passenger side.

🤣 best answer!!!!

What is your theory on the plastic squeeze bottle that lasts for years while in contact with red or blue loctite?!?

I’m sensing a pattern here…. has anybody checked the tailgate?

https://www.jeepgladiatorforum.com/forum/threads/amp-research-bed-step.30257/#post-927260

I vote for wait it out. Pretty sure it will be back tomorrow.

My 2022 model built Dec ‘21 has it, and is my first truck to ever have a tailgate hinge lock. Every truck I’ve owned starting since 1974 dodges have had tailgates that just lift off. I always thought it was a pretty nifty feature!

I have the factory soft roll premium. The material shows less dust and requires less cleaning than previous vinyl covers I’ve had. Also, with the Gladiator box being short, narrow and not very tall, I like that the soft roll is top mounted, frameless, and offers full access.

Sounds like a good shop project for you! Or, if you’re not into welding, I’m sure your local machine shop can make one up exactly as like want.

I just ordered and received these through Jegs. Wasn’t sure about how the delivery to Canada would go but they arrived in less than 5 days! I’m super happy with them. Very secure, large adjustable mirror, and they look great. They are K-source brand, #179-80750 and even come with a high...

I’ve got the Mopar lift on my ‘22 Rubicon. I purchased the Steersmarts Yeti XD trackbar and tierod, along with the Fox ATS with high mount bracket, all from Northridge 4x4. It installed easily and I’m happy with the performance. I’m still running the factory draglink, mainly because I like...

Really wish they offered 4H Auto. I live in the land of ice and snow where I really like to have it in 4wd while on the highway in the winter. Too many surprise ice patches.

L I believe the standard procedure is fill the shed.

My truck is a 12/21 build date ‘22 JTR 3.6. I just had the dealer look at a small leak on the right rear and they have ordered the axle,bearing,seal.

I watched an episode of graveyard cars or bitchin rides, can’t remember which… they had a car that had been professionally undercoated decades earlier and were shocked how effective it was.

Update #2. To my dismay, it is leaking again! I have it booked in for the ZE2 tailgate recall and will start the warranty process on the passenger rear axle seal leak.