Search results

And on a previous jeep with a rear D44 and stock cover, i slid the rear diff forward over a rock and peeled the rear cover enough to have a slight gear oil leak. It is a thing

The oem diff covers are quite thin. Darn confident in my AEV covers - they are overkill

A ceramic coating or ceramic hyperwax will repel dirt / dust. Some better than others. I've used mothers CMX hyperwax and loved it. Tried turtle wax graphene hyperwax and not a fan. The CMX is not "gooey" at all and repels dirt very well. Even running through a clean rain will make the jeep look...

And just to be clear, that is poke with a 285/75 tire. Happy jeepin'!

Sure thing - total poke at sidewall bulge is 1.5". Poke at tread shoulder is about 1" using my level as a straight edge and tape measure off the fender

Update - the stock lug nuts will fit, and a typical non-impact "thinner" 7/8" socket will also fit to install them. However, the tire shop only had thick impact sockets and their 7/8" would not fit. So i bought a set of cheap lug nuts that are smaller just to not have any issue between standard...

JK Saltas on 285/75/17 KO2's!

Impatient pics with dirty jeep and tire goo still on, but JK saltas and 285/75 KO2's!

No, it is, look a little closer -giggle-

That's a flag nut you're welcome lol

Hey, me too!

You're all wrong...... .... it's a flag nut!

I just checked because i wondered if i needed a set too, but the oem lug nuts i have take a 7/8 socket, and that same 7/8 socket falls down into the lug holes on the saltas i got from aev with room to spare. So it looks like the factory nuts and a standard 7/8 socket fits fine. Makes sense, as...

Thanks to all who took the time to help me out! More than 2/3 for satin black, and after i added my wife's satin black vote and my 8-year-old's satin black vote, they went satin black today. Part of me will always wonder about the silver though..... thanks again!

Edit - Yep, i'm getting 1 1/4" from the "seating" to the top edge it looks like

Good looking jeep you've got there!

Last comparison pic i have for black

Also.....

Love the savegres - they were on my previous jeep. When i got the gladiator, the red jumped out at me yelling "buy me buy me!" So i did. But in hindsight, while i still love the red, it's a little "loud" and a little "sporty." I think the savegres are also "sporty" looking, so going with...

That's right, $150 per wheel for the silver JK saltas. Lug holes look enlarged for JL/JT - i'm going to test fit a lug nut soon to confirm