Search results

Our new Under the Front Seat Compressor Mount is now available!! Designed to hold the ARB twin or single compressors as well as most ViAir compressors. The mount is made of 1/8” powder coated aluminum. No cutting of the carpet or plastic air vent is required. Depending on what floor mats you use...

Our new Rear Door Electronic Security Deadbolt System for the Alu-Cab Canopy Camper installs easily and gives the rear door a strong center-locking deadbolt for the door that works with your electronic locks and key fob. The deadbolt system is available in black texture powder coat or raw...

I added a new compressor mount to the lineup for the rear floor of the Gladiator. It was primarily designed to work under seat deletes, commercial or DIY, but can also be used on its own. It could also be used as a battery tie-down, for HAM radios, electronics, etc...

Our new ARB Single Compressor Firewall Mount is now available! We need to test the fitment for the Diesel, it may work, but not 100% sure yet. The mount and firewall brace are 1/8" aluminum powder coated in a texture black finish. The mount is an easy, no-drill clean install. You can purchase...

Our Dead Pedal for the JL and JT! Never fumble for a dash switch again! Keep your hands on the wheel and eyes on the road while clicking your foot to control your light. I also designed an adapter plate for use with a momentary switch for your train horns! Made from 1/8" aluminum and texture...

Just released! Our new ARB Single Underhood Compressor Mount. Gas engine only. The kit comes with everything you need except the compressor. https://www.813fabrication.com/product-page/underhood-arb-single-compressor-mount-jt-jl

Anyone with a '22 model, did your engine come with a cover? If not, can you confirm if the engine bracket that holds the engine cover is there? I read another post that some did not come with a cover. That post also said they would be deleting the bracket that is there to hold the cover. Can...

Introducing our new products for the Alu-Cab Canopy Camper!! We have been working hard to put together some items that we felt would fit in with some of the other great products on the market. All aluminum and black texture powder coating. Look for even more Alu-Cab products in the near future...

CHRISTMAS SALE! Now thru Dec 25. We decided to have a Christmas sale to say thanks to everyone! Save 10-20%! Find the best deals of the year on our Tailgate MOLLE panel, the Under Seat Storage Bin and much more! We usually ship within 1-2 days of ordering so there is still time to get items...

We now have a few small items available for the Alu-Cab Canopy Campers. We have designed a stronger door strap kit that moves the weight of the door to a stronger location. We also have a Jeep Gladiator specific rear tailgate backup camera relocation bracket. The bracket relocates the tailgate...

IT'S HERE! BLACK FRIDAY sales have arrived! Our first and only SALE of the year. Use promo code "SAVE10" to save 10% now through Cyber Monday!

I currently have the Mopar 2" lift. I have an Alu-Cab installed and would like to stiffen up the rear some. I have already added a Hellwig Rear Sway Bar which has helped a lot. I want to stiffen up the rear some as I feel a little bounce now with the Alu-Cab. The rear sagged very little with the...

If anyone has a set they want to sell let me know. I really only need two for a custom setup, not in the bed. I want these specifically because of the thickness so I don't want to use Unistrut

Shout out to @agilitycustoms and James "The Stradman" @thestradman on finishing phase 1 of the Jeep Gladiator Hellesaurus build. Todd with @agilitycustoms used our Behind the Rear Seat ARB Twin/Single compressor mount along with our new ARB Locker Manifold add-on kit to set up the 3 axle...

We were able to grab 6 ARB twin compressors when they became available last week. I put together a few full package kits on the website with compressor included. Everything you need for your setup! Take a look, there are only 5 remaining! Yes, we have 5 of them in stock...

We now have 4 different add-on kits that work with our Behind the Seat Compressor Mount. If you want everything in one spot, hidden, lockable and flexible... look no further! If you are using our compressor mount and want to add the ARB Locker Manifold, we have a kit for that. If you want to...

Orders are now open. We have a few Full MOLLE versions still in stock and more Solid front versions in production. We sold out of all 15 Solid models we had in less than 24hrs this past weekend! Only 4 Full MOLLE models are in stock now and ready to ship! Our ALL NEW, ALL ALUMINUM Under Seat...

A quick overview of all 4 sides setup with our Bed Side MOLLE, Tailgate MOLLE, Cab Side MOLLE and our new Bed Side ARB Compressor Enclosure. Along with the compressor enclosure we are using a new prototype, shorter, Under Rail MOLLE Panel to fill in the area beside the compressor enclosure to...

Testing some ideas for the new Bed Side Air Compressor Enclosure and the Under Seat MOLLE Bin! Yes, it fits well! The full-size tank would fit under the seat also. I have the full-size tank and will test it tomorrow. Take a look at both new products on our website. The Bed Side Air Compressor...

Take a look at our newly released Full Bed Side MOLLE Panels. The panel system mounts with (under) or without the Trail Rails. 1/8" aluminum with black texture powder coat. They are a 2-piece design that lets you run the top panel only if desired. The panels are universal for driver or passenger...