Search results

Bump!!

I just installed the same kit last week and noticed that the Falcons 3.3 Extend longer than the springs. I advise against using the sway bar links to limit travel. A viable option could be installing limiting straps.

I saw the Artec front inner fenders for the Falcon shocks and decided to pull the triger on them. Now the question is what is the best paint to use in such part? Durability is my main concern as I plan to just paint them black regardless of paint type.

I am running into an issue with the installation of the front upper control arms. The instructions call for the bend to be away from the frame but for some reason if I do that the arm rubs with the frame at the adjustable joint. Anyone else have this issue?

Did you re-adjusted the control arms or had to deviate from Clayton's recomendations after installing the spacer to achieve proper pinion angle?

Can you provide me with the drive shaft information you installed? I am waiting on my 3.5 lift to arrive and might have to start looking into what drive shaft I need, TIA.

@Clayton Off Road, Will the lift kits that are on order ship with this new track bar?

I am in!!!

A work in progress... ADD Offroad full size bumper Fuel Zephyr Bronze -12 BFG KM3 37/13.5/17 Go Rihno D6 side steps Now waiting on the lift to arrive.

Bump! Anyone willing to share their descision after installing a Clayton kit?

What is the width and offset of those wheels?

Thanks for your help, I went ahead and orderd the KM3 37/13.5/17 hopefully there is no rubing until I get the lift.

Hey guys, I am looking at the Clayton overland plus lifts 2.5 and 3.5, but in contrast to MC they do not mention the beed for a drive shaft on their kits. So for those of you who have the Clayton lifts installed which kit do you have and did you replaced or are you planning to replace the drive...

After doing some research I read JL's can use 37's with no lift as long as you have the proper backspace between the wheel and the axles (for city driving only). With that in mind have any of you done it on the Gladiator? If so what is your set up? I am planning to do a 3.5 inch lift but until...

I am thinking about doing the same since my wheels are in but the lift is not going to arrive until after the holidays. Can you help me out here what is the size and offset of the wheels you are running? is there any rub at all during daily driving? and do you believe I could use 37 /13.50 Nitto...

Thank you, I am looking to get me set of the same wheels in bronze for my sting gray and add Clayton 3.5 lift. My only thing was that I didn't want to go with the -12 because of how much they will stick out. Your set up looks amazing.

Are those wheels +1 or -12? What lift and tire size are you running?

I attempted to connect the light bar to the factory fog light harness but did not work for some reason. I bought a harness adapter and spliced the bumper harness (at the bumper not at the frame) to connect it. My set up was a plastic bumper LED fogs which I replaced with a 20 inch E-Series...

I called today inquiring about my parts which were ordered on Oct. 7, 2020 at the Grapevine Jeep location and according to @JeepCares had an ETA of Nov. 16. I was told "there is no ETA and there is a national hold until December 7. The representative said that if the hold is lifted I might get...

I am looking to get new wheels for my JTR, and although I have not decided on Brand or style I am having a hard time deciding on the offset measurement. Currently considering the +1 vs the -12. I am planning to add a lift and run 37. What have you gone with and what are the advantages of going...