Search results

I own two sets of those 392 Mopar wheels. I chose them because they be capable and they’re going to be the lightest with the factory offset I wanted 44.45MM. They don’t poke out they’re right at the fender line. They’re only available from 2021 to 2023. Yes they are 7.5 inch width but once...

Yup, around 20% off with Blackstone on some of the numbers. Also, Blackstone doesn’t even show you the fuel delusion. So yes, Crapstone

217F is a great temp to evaporate off moisture. You want the oil to be that high and even a little higher.

For a year I wondered about this then before I bought my Nitto Recon Grapplers 37x11.5x17" , which Im going to mount on a Mopar 392 (2021-2023) Bead lock wheel. In order to get to the published size of the tire, you have to use the wheel width they show on their sites. In the case of 12.5"...

Wow even with the thermostat huh there is some circulation then?

Thanks for posting up! Thanks for posting up! Add 20% to this number as Crapstone is off due to non ISO testing and calibration. They want to make max money and not focus on pesky costly and time consuming calibration. The right tune can lower aluminum. That has been shown to be related to...

So about 5PPM for a 1000 miles on iron. Wow the new tune from GDE kept aluminum low. This is good to see. With black stone it will show 19-20PPM iron im going to guess. With Amsoil MS this would have been in the low teens in iron.

Lol did you see the price of the Battery! Who said $300, I paid $280 but the price has gone up since lol. Also, not just for rotational weight but love how they look as well.

The stock one won't work. I did use the one it came with but two bolts are not possible to fit as others had the same issue. Not an issue since it is held with many others.

Hi Yes I did but ready for a pain install mostly with the winch space. I used the big warn Xeon Platinum 12S. A smaller winch will be easier. I also did it with out grinding the frame horns. Here is a my build thread that might be of help. If you have more questions let me know and I can help...

Unfortunately, it does not stop it from starting on the Eco diesel. Because of the high-pressure mechanical fuel pump, if you cut the lift pump from working , you would damage the high-pressure pump . If you were to floor it, the computer prevents it from revving up since it’s throttle by wire.

This is for sale section. Don't know if you can move it or need the mods to do it but then you will get much more answers. Borah is 43lbs with the ring and hardware I believe. I would go stock wheels and 35x11.5 if me. I went with the 392 Mopars 21-23 style and added the bead lock ring. I got...

I was thinking about getting one and installing on the rack with security hardware and use it for trips. Is it mount inside because you use it regularly?

I was looking at the picture and it does have the S&B logo on it. They do look pretty nice but I recall some say it didn't stop overheating under high loads up mountains. One other issue is that I would block these from the inside until full summer temps. You lose warm up times and efficiency...

Yes but when you see 7PH you change it before seeing 6.9PH. In fact it is even more prudent to do it at 7.5PH.

Warning using Redline Water Weter. It is not compatible with OEM coolant. It left some brown oily residence from the silicone in it. Thank fully it is not harmful and now is a good time to switch to the Zerex HD...

The Restore and Protect from Valvoline is the best for cleaning keeping clean.

Bump

Bump

Hehe yea out of site out of mind. Me too. I have bead locks Im going to install which I can do with out a machine using ABC silicon ceramic balancing beads but also bought this little China unit for $450 shipped. I also bought a polymer duck head and and vinyl sheath for the for the bead...