Search results

My front steel bumper (oem Rubicon steel front bumper) is kind of beat up and needs to be painted. I am considering having it painted Gobi to match the truck. Has anyone done this already? If so please post some pictures. Thank you.

I bought my 2020 Mojave used. The previous owner swapped the plastic bumper out for an OEM steel bumper. They reused the plastic bumper wiring harness. I want to buy the wiring harness for the steel bumper so the clips line up. My Mojave has OEM Led fog lamps. Does anyone know the part number...

I have taken a few trips in the last month or so, and I get bored! This is bad because then I come on the forum a lot and see all the cool stuff people are doing to their Jeeps and I start spending... I have ordered so much stuff for my Jeeps in the last month or so, I can't even remember buying...

At first I didn't not like the Orange vent rings, now they have grown on my and I loke them. I don't like the Chrome rings around the speedometer and the chrome on the steering wheel. They should have made them the same as the vent rings ... Does anyone make matching rings and steering wheel...

Updated Last on 03/05/2024 I wanted to make a dedicated thread on CAN Bus Immobilizers so the information is available and easy to find if someone is looking for it. Too many threads with valuable information get watered down with either misinformation or people derailing the thread with...

I am changing the bushings in my Mojave shocks. I have changed tons of press in bushings in my life and never had a problem before. But these are impossible... I am having a problem getting the bushing in past the outside lip, it basically tears. I have tried everything, grease, WD40, etc .. I...

I did a search, but it doesn't seem to have been talked about... I was wondering if anyone knows of a thin, light 37", basically a 37" donut, that could be used as a spare. I have a Clayton rear track bar, so a 37" with fit. But I do not rotate my spare tire into the trucks tire. I am looking...

So like everyone else, I hate the weather updates popup that keeps coming up on my screen. My wife has a checkbox in her 2022 JLU to turn them off, I do not have a checkbook in my 2020 Gladiator. Does anyone else have a checkbook like my wife? Update: The software update fixed this, I now have...

I need some spring sleeves to dampen the squeakyness of my spring ls. I have Clayton and Synergy springs. Who makes them? I ordered these awhile ago, but they are not in stock and the company doesn't know when they will be... https://www.034motorsport.com/coil-spring-sleeves.html

Did a search on the forum and nothing came up at all... These tires look good, I am wondering if they are actually 36" tall. The company is in Texas. I called them and they said the tires are 36", but I didn't have the warm and fuzzy that the guy knew what he was talking about. Anyone running...

Does anyone make a better Mojave upper shock bolt (M14)? On the stock bolt the shoulder area is smaller than the threads, that is backwards from the norm. It leaves a little slop.

Not sure why, but every time I try and change the LaneSense Warning settings to "early" it immediately goes back to late. Anyone experience this before?

So I just bought my 2020 Mojave (used) a month ago. I just finished putting the lift on (I will detail that in a separate post). I took measurements before and after I put the lift on. It is about 3/8" to 1/2" taller on the drivers front, both before I put the lift on and after. Is that normal...

So when I bought my (used) 2020 Mojave it had an OEM steel front bumper on it, but it can't be stock because it didn't fit correctly. The stock Mojave steel skid plate does not fit correctly. My question is do they make an OEM steel front bumper that fits correctly with the stock steel skid plate?

I am looking for a set of the FOX Offroad Shocks 883-26-051 PERFORMANCE ELITE SERIES 2.5 RESERVOIR Shocks. If anyone wants to sell a set, let me know. Thanks

I was wondering if anyone with a Mojave has put front Fox 2.5 Elite Reservoir shocks on a Mojave. I want to buy a set (I already have the rear), so I can compare the Mojave shocks to the Fox Elite 2.5 shocks. My question is on the hose that comes on the Fox 2.5 Elite reservoir shock, it long...

Just curious, does anyone know what size the factory Alpine sub is? Has anyone tried putting a different subwoofer in the factory enclosure?

I was wonder if anyone with a stock Mojave (steel front bumper, no winch) has put a Clayton 2.5" lift or front springs on or the new 1.5" springs on. I would love to see pictures. I am tossed between Clayton's 1.5" front springs and stock springs in back or Clayton's 2.5" springs in front and...

It took me a while to post it, but here is my (now crashed) Gladiator stereo install. It consists of: -Rockford 4 Channel Amp -Rockford Mono Sub Amp -Rockford 10’ Subs in Fox Sub enclosure -Rockford 6.75 Separates In Front -Rockford 6.75 Coaxles In Bar -Rockford DSP One thing to note, I made a...

I have a Mojave with the full Factory LED lighting. I was able to make the DRL the dedicated white part of the turn signals with JScan but the Halo in the headlight is still on with the DRL. If I turn off the Signature lighting setting the Halos are off with the DRL but also don't come on with...