NEW PRODUCT! JEEP JL / GLADIATOR UNDERHOOD PLATFORM ACCESSORY PLATE

[813 Fabrication & Design]

NEW PRODUCT! JEEP JL / GLADIATOR UNDERHOOD PLATFORM ACCESSORY PLATE.
This first test batch is in raw aluminum and 15% off! Jeep JL / Gladiator UnderHood Platform Accessory Plate. This is our largest platform for mounting electrical accessories such as fuse blocks, fuses, bus bars, DC to DC charge controllers, MPPT charge controllers, trickle chargers etc.

The plate has a solid top so that you can arrange items the way that best fits your setup! The plate is designed to mount on the driver side of the Jeep Gladiator or Jeep JL gas models.

This test run mount is 1/8" raw aluminum. Stainless steel mounting hardware included. No drilling required for installation.

DOES NOT fit diesel or 392 model Jeeps.


https://813fabrication.com/products/jeep-jl-gladiator-underhood-platform-accessory-plate

Sponsored

 

[Bandit’s Lair]

That’s a huge plate!!!!! Looks great! I think I’m glad I waited to pick one up from you. This may meet my needs even better than the original one.

 

[813 Fabrication & Design]

That’s a huge plate!!!!! Looks great! I think I’m glad I waited to pick one up from you. This may meet my needs even better than the original one.

Lots of space with this one for sure!

 

[Neomonk21]

Since it doesn't fit 392 models does that mean it doesn't fit Mojave?

 

[813 Fabrication & Design]

Since it doesn't fit 392 models does that mean it doesn't fit Mojave?

Should fit Mojave. The engine makes the difference with the 392

 

[Jteakus]

No love for the diesel crew.

 

[813 Fabrication & Design]

No love for the diesel crew.

Unfortunately, no space for the diesel crew

 

[Jteakus]

Guess we will have to settle for the torque,
Very nice product you have there.

 

[813 Fabrication & Design]

Guess we will have to settle for the torque,
Very nice product you have there.

Thanks! Much appreciated

 

[Neomonk21]

Do people typically drill into this to mount stuff? Or just use double-sided tape or velcro?

 

[Bandit’s Lair]

Do people typically drill into this to mount stuff? Or just use double-sided tape or velcro?

It looks to have a good amount of support structure so I’d have absolutely no problems drilling into this one. I’d probably use self tappers and some 3M double sided sticky. For a switch panel.

 

[813 Fabrication & Design]

Do people typically drill into this to mount stuff? Or just use double-sided tape or velcro?

From what I have seen, most people drill it once they figure out how they want things to sit. I leave it blank so that there are not a bunch of holes that don’t line up with what you need plus it makes it cheaper for the customer. The more holes to laser cut, the more the cost goes up. And since it is aluminum, no need to worry about corrosion after drilling.

 

[polishwings]

NEW PRODUCT! JEEP JL / GLADIATOR UNDERHOOD PLATFORM ACCESSORY PLATE.
This first test batch is in raw aluminum and 15% off! Jeep JL / Gladiator UnderHood Platform Accessory Plate. This is our largest platform for mounting electrical accessories such as fuse blocks, fuses, bus bars, DC to DC charge controllers, MPPT charge controllers, trickle chargers etc.

The plate has a solid top so that you can arrange items the way that best fits your setup! The plate is designed to mount on the driver side of the Jeep Gladiator or Jeep JL gas models.

This test run mount is 1/8" raw aluminum. Stainless steel mounting hardware included. No drilling required for installation.

DOES NOT fit diesel or 392 model Jeeps.


https://813fabrication.com/products/jeep-jl-gladiator-underhood-platform-accessory-plate

can we get also some practical ideas how to finally use it?

 

[813 Fabrication & Design]

It looks to have a good amount of support structure so I’d have absolutely no problems drilling into this one. I’d probably use self tappers and some 3M double sided sticky. For a switch panel.

Exactly! It is 1/8” aluminum and bolts down strong. I can shake the whole truck pulling on it and it does not budge.

 

[813 Fabrication & Design]

can we get also some practical ideas how to finally use it?

Apologies, I don’t have any photos of anything mounted on it yet since it’s so new. But there should be plenty enough space for mounting fuses, bus bars, control, switches, relays, trickle chargers, etc. It’s a good amount of space so you can mount about you need underneath it. Except a compressor not enough height for that.

Sponsored