Kookie18
New Member
- Thread starter
- #1
First time Poster. Joined to ask this question specifically. I have a 2021 Gladiator Rubicon. I live in Hawaii, so I run the AC year round. I had it going the other day and the air just stopped flowing. Full stop. Not just slowed, completely stopped. It showed zero sign of weakening prior to this. Just full-blast to no-blast.
I have the Stinger HEIGH10 installed, so I don't know if that can cause issues. However, it's been installed for nearly a year now without issue.
I did the following troubleshooting:
I toggled through the different modes and can hear the actuator switching between feet, face, windshield, etc.
When I turn on the AC, I can hear the compressor/condenser kick on under the hood.
One thing of note. On the Stinger, if it hit AC or Max AC on the Climate screen, the button toggles on for a few seconds then toggles off on it's own.
I am assuming it's the HVAC Control Module/Panel, but could use some input if you got it.
Thanks!
I have the Stinger HEIGH10 installed, so I don't know if that can cause issues. However, it's been installed for nearly a year now without issue.
I did the following troubleshooting:
I toggled through the different modes and can hear the actuator switching between feet, face, windshield, etc.
When I turn on the AC, I can hear the compressor/condenser kick on under the hood.
One thing of note. On the Stinger, if it hit AC or Max AC on the Climate screen, the button toggles on for a few seconds then toggles off on it's own.
I am assuming it's the HVAC Control Module/Panel, but could use some input if you got it.
Thanks!
Sponsored
