New Mexico 2023 Jeep Gladiator on 1-Tons

[Demlockian]

2023 Jeep Gladiator Mojave
3.6L | Automatic
Dana 60 Front
14-Bolt Rear
17,8XX miles
*Mileage may increase slightly, not a daily driver though*

Nothing is wrong with the Jeep. I have decided to move on to other hobbies (flying, hunting, etc..).

Asking $47,500 (Total of all parts surpass $40K). Everything is tracked in Excel (with part numbers), which I can make available for serious buyers.

~~Armor~~
Rock Hard 4x4 Aluminum Patriot Series Mid-Width Bumper

~~AUDIO~~
Rugged Radios Fixed GMRS Radio Kit

~~BODY~~
K-Source Snap & Zap Extended Mirrors

~~DRIVELINE | FRONT AXLE~~
2002 Ford F-250 Super Duty Dana 60
Artec Industries APEX Super Duty Swap Kit w/Johnny Joint
Artec Industries Hardcore Differential Cover
ARB Air Locker (35 Spline, Factory)
Revolution Gear 5.38 Gear Package with Master Install
Spicer Axle Inner Tube Seal Kit
ECGS Forged 1350 Pinion Yoke
Generic Knuckle Seal
ECGS 35-Spline Chromoly Axle Shaft Kit
Currie Front Unit Bearing with ABS
Warn Premium Locking Hubs, 35 Spline
Adam's Drive Shaft | 1350
**NOTE: ABS/sensors work perfectly as the axle is using the same unit bearing (tone ring) as Currie's aftermarket axles. Includes second set of axle shafts.

~~DRIVELINE | REAR AXLE``
2001 Chevrolet 2500 14 Bolt w/Shaved Lip
Artec Industries APEX Rear 14 Bolt Swap Kit
Artec Industries 14 bolt APEX Pinion Guard with Bridge
Artec Industries JT Factory Disc Brake ABS Kit
Artec Industries Differential Cover
ARB Air Locker (30 Spline, Factory)
'Revolution Gear 5.38 Gear Package with Master Install
Yukon Hub Bearing & Race - Outer
Yukon Hub Bearing & Race - Inner
Duralast Hub Wheel Seal
LetzRoll Offroad Rear Emergency Brake Kit
Adam's Driveshaft 2-Piece | 1350
**NOTE: ABS/sensors work perfectly with OE sensors, no aftermarket gimmicks. The e-brake cables are backordered and not yet installed.

~~ELECTRICAL~~
Garmin PowerSwitch (6-Switch via CarPlay/Android Auto)
Wireless Car Play Adapter

~~ENGINE AND PERFORMANCE~~
MOPAR Trailer Brake Controller
Z Automotive Tazer JL Mini

~~INTERIOR~~
Alien Sunshade Orange Paracord Grab Handles
Auovo Auto Cup Holder Inserts with Tray
JCR Off Road Underseat Storage Basket
MOPAR Instrument Panel Bin - Single Piece

~~LIGHTING~~
Artec Industries A-Pillar Dual Surface Light Mount
Auxbeam P4 90W LED, Spot Lights, White, Pair

~~ONBOARD AIR~~
American Adventure Lab ARB Dual Under Seat Mount
American Adventure Lab Connection Kit - Passenger
ARB CKMTA12 On-Board Twin High Performance Compressor

~~RECOVERY~~
Smittybilt X20 Gen3 12K Winch w/Synthetic Rope

~~SKID PLATES~~
Motobilt Skid Plate System

~~STEERING~~
PSC EHPS Steering System with 7.5" Stroke and 1-1/2" Tie Rod Clamp
Letzroll Offroad Forward Trackbar Mount
Artec Industries Crossover Weld-On High Steer Arms
Kryptonite Heavy Duty Replacement Ball Joint
Barnes 4WD 7/8 Inch Heim Steering Kit
**NOTE: The EHPS is being replaced with hydraulic assist, non-electric due to pump issues (9/26). Come with complete set of new heims for steering (nothing wrong with ones installed, I just ordered a spare set.

~~SUSPENSION~~
Synergy 4-inch Stage 2 Suspension System
Metalcloak Sway Bar Quick Disconnects
AccuTune Front, 2.5 FOX Shocks, R/R, DSC, 4.5-6″ Lift
AccuTune Rear, 2.5 FOX Shocks, R/R, DSC, 3.5-4″ Lift
NOTE: Front axle is ready for bump stops, however, not installed yet. The rear axle has installed bump stops.

~~WHEELS AND TIRES~~
Mickey Thompson Baja Boss A/T 37x12.50R17
Vision Off-Road 111 Nemesis Matte Black | 17x9 | 8x6.5 | 4.5 BS

Sponsored

 

[Stan H]

The original axles where are they ?

 

[Demlockian]

The original axles where are they ?

Already sold.

 

[Stan H]

 

[Jeffjk]

The original axles where are they ?

Are you looking for a set of OEM Dana 44 axles? I just did a Tera 60 swap. I’m going to list a set of Rubcion axles soon. Regeared to 5.13 ratio, Chromoly rear shafts, RCV 2 piece front shafts, Metalcloak baller joints, Reid Nuckles.

 

[Demlockian]

Lowered price to $47,500

Slight damage to rear bumper as it dropped onto a ledge. To fix the corner damage, you can simply upgrade to a high and tight bumper to cover/remove.

Slight damage to bed side, no paint is damaged though. Paintless dent repair will correct this.

 

[Panthers65]

Great looking rig, and fair price.

? on the front/rear axles, so you just put a Currie hub on a factor '02 D60 and all computer/electronics were happy once you correct tire/gears with the Tazer? And the rear 14b didn't have to do anything at all, just used factory 14b sensor?

Sponsored