Sold: California 3” Synergy Front Springs

[MoparMadness]

Synergy front coil springs for a Jeep Gladiator JT or Wrangler JL. Installed and removed right after to replace with taller spring. Excellent condition. Part number 8863-30 and produces 3 inches of lift except on a two door Wrangler, will produce 4 inches. Synergy makes the best riding springs around.

Sponsored

 

[JoshuaaT]

What part of CA?

 

[MoparMadness]

I am in Sun Valley, 91352

 

[aztec1382]

These still available

 

[duvinclunk]

Did they not provide the proper 3" lift?

 

[MoparMadness]

Did they not provide the proper 3" lift?

They provided the proper lift. The rear 2 inch springs provided more than 2 inches, about 2 5/8”. Because of this, I decided to go to a 4” spring in the front and the front is still almost 1/2” lower than the rear with the 4” front springs. I am not a fan of rake but some people don’t care.

 

[duvinclunk]

Gotcha. I ask as I'm seeing a lot of just front Synergy springs for sale. What springs did you have before?

Were you happy with the ride quality of the Synergy?

 

[MoparMadness]

Gotcha. I ask as I'm seeing a lot of just front Synergy springs for sale. What springs did you have before?

Were you happy with the ride quality of the Synergy?

I originally had JKS springs. 3 inch in the front and 1.5 Inch in the rear. I liked the stance but they were way too stiff and rode harsh unloaded. JKS only has HD springs for the Gladiator which are not a good fit for my use. I did not know they were HD when I ordered them and it came down to some bad language on their website. I would have kept the 3 inch front Synergy springs if they had a shorter rear spring than the 2 inch but they don’t. Synergy is really soft and similar to stock Rubicon springs. It depends what you want and plan to use the Jeep for. I don’t keep anything in it normally and I like the plush ride of the Synergy springs. I do like Synergy and I am still running them just 4 inch in the front rather than 3 inch.

 

[Gvsukids]

I originally had JKS springs. 3 inch in the front and 1.5 Inch in the rear. I liked the stance but they were way too stiff and rode harsh unloaded. JKS only has HD springs for the Gladiator which are not a good fit for my use. I did not know they were HD when I ordered them and it came down to some bad language on their website. I would have kept the 3 inch front Synergy springs if they had a shorter rear spring than the 2 inch but they don’t. Synergy is really soft and similar to stock Rubicon springs. It depends what you want and plan to use the Jeep for. I don’t keep anything in it normally and I like the plush ride of the Synergy springs. I do like Synergy and I am still running them just 4 inch in the front rather than 3 inch.

Do you think it's better going the longer length if I have a winch and steel bumper in the front?

Sponsored