37" Tire Fit in Wheel Well

[W33kend_Warrior]

Hi All,

I need help confirming a look that I have built in my head to see if this is possible or not.

I want to lift my Jeep Gladiator Sport S with a 2.5/3" lift and I want to fit a set of 37" Patagonia M/T tires. The issue is that I'm not a fan of tires that bulge out of the wheel well, I like the clean - tucked in look.

I want to confirm if I'm right in saying that with 37" tires, there is no way to incorporate a + offset combo where the wheel is tucked into the wheel well (and is flush with the fender) where I don't run into any issues (rubbing issues, etc).

Thanks

Sponsored

 

[MPMB]

You like the tucked in look, hmm?

To keep basically the same width as stock, you'd need +40mm offset, which would put your tires 1.24" closer to the suspension. Add even more when you're compressed and aired down.

A +25mm offset would add .65" on width outward, and the same inward, which would probably look ok for you.

The JT already has an unimpressive turning radius, so losing any steering angle would suck.