@AEV_Mojave Build Series

[UIN2IT]

Ordered my 2021 Mojave Gladiator on July 8th....was delivered on July 31st!!

FOLLOW MY BUILD SERIES HERE:
YouTube BUILD Series

Custom spec'd with the following options:

2021 Gladiator Mojave edition
3.6L Gas w/8spd Auto
Premium Cloth interior
Bright White
Trailer Tow Pkg
AUX Switches
Black 3pc hard top
Color matched fender flares
Cold WX pkg
All weather Floor mats
LED Lighting pkg
Select Trac 4wd
Spray in Bed Liner

I was 48hrs late realizing I forgot to add the Cargo management group (Rails, Bed plug & Lockable under seat storage)

Here it is:

Sponsored

 

[UIN2IT]

And of course I couldn't leave the dealer with the vehicle stock....just not how I roll!
So on went the Milestar Patagonia 37x12.50 tires and AEV Borah Onyx/Machined Wheels!!
(These are the JK Spec offset wheels .... +4 offset) ZERO rubbing!

 

[Tokolosh]

I want lockable rear storage as well but I am leaning toward 813's molle basket for the rear seat. I think it is a bit more flexible for what I'd want back there.

Definitely will follow your build. Looks good on those wheels.

 

[UIN2IT]

SUSPENSION PLANS:
AEV Mojave specific lift being delivered today...
I also got the MetalCloak Pieces to compliment the lift:
Front Adj Lower Control Arms
Front & Rear Adj Tracbars

Other Suspension pieces ordered:
Synergy Trackbar & Sector shaft brace
FOX Front Steering Stabilizer

 

[balucipher]

damn, already looks so good on those wheels and tires

 

[brianinca]

JCR makes a nice MOLLE storage box, too.

I want lockable rear storage as well but I am leaning toward 813's molle basket for the rear seat. I think it is a bit more flexible for what I'd want back there.

Definitely will follow your build. Looks good on those wheels.

 

[UIN2IT]

Added the Hard Rolling Tonneau Cover from Rugged Ridge:




I also decided to throw the Silver Protection rings on the Borah wheels.....

 

[UIN2IT]

Delivery!!

 

[UIN2IT]

I got the genuine Mopar Steel bumper installed tonight. I transferred over the Mojave Orange hooks too. Love how it turned out!!!
TIPS:
1. Slight trimming needed , on outer top edges of skid plate and inner edges of underside of bumper.
2. Recommend a warm winch plate or 1/4" spacer to space the bumper out a bit.
3. Loosen the skid plate brackets a bit so they move freely
4. Slightly screw-in The two front bolts on skid plate first

Sponsored