Black Rhino Chamber Wheels 4.04 or 4.75 backspace and -18mm or 0 offset??

[Bumpy Ride]

hey all... I'm thinking of getting Black Rhino Chamber wheels. Which setup do I go with, preferred..., if i'm planning on lifting with Clayton Overland Plus 3.5" lift? With 37 inch tires

17x8.5 4.04 backspace, -18mm offset
17x8.5 4.75 backspace, 0 offset


Thanks!

Sponsored

 

[Clayton Off Road]

Both would work, but if I had to recommend one over the other I would go with the 4.75 backspace option!

 

[Bumpy Ride]

Both would work, but if I had to recommend one over the other I would go with the 4.75 backspace option!

Is because of possible clearance issues? At the same time, I want the tires poking out more but not sure how much more than the one with 0 offset (4.75).

 

[Clayton Off Road]

No both fall within spec that there would not be any rubbing or clearance issues. The wheels with the 4.04 backspacing would stick out further than the wheels with the 4.75 backspacing. Hopefully that helps!

 

[Bumpy Ride]

No both fall within spec that there would not be any rubbing or clearance issues. The wheels with the 4.04 backspacing would stick out further than the wheels with the 4.75 backspacing. Hopefully that helps!

gotcha! You’re right thanks for looking out. !

 

[Bumpy Ride]

No both fall within spec that there would not be any rubbing or clearance issues. The wheels with the 4.04 backspacing would stick out further than the wheels with the 4.75 backspacing. Hopefully that helps!

So I ordered Method 301’s: 17x9, 4.50 inch backspace -12mm offset. Nitto Ridge Grapplers 37’s...

Shouldn’t have any issues with clearance or rubbing, correct? Especially the LCA’s?

 

[Clayton Off Road]

So I ordered Method 301’s: 17x9, 4.50 inch backspace -12mm offset. Nitto Ridge Grapplers 37’s...

Shouldn’t have any issues with clearance or rubbing, correct? Especially the LCA’s?

No you'll be perfectly fine!

Sponsored