CavFab Diff Covers!

[Watrmel0nBandit]

Are these available with no logo welded on?

Sponsored

 

[CavFab_MFG]

Are these available with no logo welded on?

Sure, send an order in and then PM me your order number (or just put a note on the order)

 

[CavFab_MFG]

If you damage your stock cover on the trail, chances are you are going to be towed home...

Protect those gears with beefy, American Made diff covers. Cheap protection for critical components.

https://cavfab.com/collections/jeep-axle-differential

10% Off With Code: JTFORUM

 

[Splenda]

Are the front and rear Dana 44 diff covers on the Gladiator the exact same part?

 

[Hootbro]

Are the front and rear Dana 44 diff covers on the Gladiator the exact same part?

They are different.

 

[Splenda]

They are different.

Is this the front of rear? I don't see anything in the description. https://cavfab.com/collections/jeep-axle-differential/products/dana-44-diff-cover

 

[Hootbro]

Is this the front of rear? I don't see anything in the description. https://cavfab.com/collections/jeep-axle-differential/products/dana-44-diff-cover

That is for the older Dana 44's with a 10 hole bolt pattern found on the JK's.

JL/JT use a 12 hole bolt pattern for the Dana 44 "Advantek" axles.

Front:

https://cavfab.com/collections/jeep-gladiator-jt-parts/products/front-m210-diff-cover-rubicon-jl-jt

Rear:

https://cavfab.com/collections/jeep-gladiator-jt-parts/products/rear-m220-diff-cover-rubicon-jl-jt

 

[CavFab_MFG]

That is for the older Dana 44's with a 10 hole bolt pattern found on the JK's.

JL/JT use a 12 hole bolt pattern for the Dana 44 "Advantek" axles.

Front:

https://cavfab.com/collections/jeep-gladiator-jt-parts/products/front-m210-diff-cover-rubicon-jl-jt

Rear:

https://cavfab.com/collections/jeep-gladiator-jt-parts/products/rear-m220-diff-cover-rubicon-jl-jt

Thanks, we will put you on a few minutes of payroll!

 

[DanJT]

I just ordered the front Cover, Back will be next time.

 

[Splenda]

That is for the older Dana 44's with a 10 hole bolt pattern found on the JK's.

JL/JT use a 12 hole bolt pattern for the Dana 44 "Advantek" axles.

Front:

https://cavfab.com/collections/jeep-gladiator-jt-parts/products/front-m210-diff-cover-rubicon-jl-jt

Rear:

https://cavfab.com/collections/jeep-gladiator-jt-parts/products/rear-m220-diff-cover-rubicon-jl-jt

Thanks!

 

[DanJT]

Thanks!

Did you order them yet?

 

[Splenda]

Did you order them yet?

They're on my list. I just dropped $800 on skid plates.

 

[DanJT]

Have the Cavfab front diff cover painted and ready to go. I have surgery coming up in a couple of weeks and plan to get the rear cover and have it painted hopefully before the surgery. if no then sometime after.
here it is sanded and ready for paint. (yes I did clean it)

Here it is painted, yeah i dropped it in the gravel.

 

[DanJT]

Oh and yes, I did apply 2 coats of self etching paint before the red paint.

 

[CavFab_MFG]

Oh and yes, I did apply 2 coats of self etching paint before the red paint.

Looking good!

Sponsored