Clayton Offroad leveling kit shock length and bump stops

[Deleted member 67636]

I am looking into the 1.5” Clayton Offroad leveling kit for my JTR. Their website states the lift is closer to 2” on the Rubicon. My question is, are 2”-3” lift shocks the correct length for this kit or stick with 0-1.5” lift shocks. Also, would 2” bump stops be correct for this kit?

Sponsored

 

[AMM]

@Clayton Off Road I've been looking at picking up the same leveling kit & debating if the Fox 2.0 IFP in 0-1.5" is the required pair as mine seem to be aging out @ 102k

 

[21Mojave24XR]

As far as the shocks go I would probably stick with the 2-3” shocks as it will lift about 2” after settling

I ran this kit on my Mojave and ran shock extensions and they worked fine but it’s turned into a 3.5” full Clayton lift on mine so be careful

 

[Clayton Off Road]

@Clayton Off Road I've been looking at picking up the same leveling kit & debating if the Fox 2.0 IFP in 0-1.5" is the required pair as mine seem to be aging out @ 102k

You would want to go with the 2-3" set actually!

Sponsored